Effect of Humidity on Dielectric Charging Process in Electrostatic Capacitive RF MEMS Switches Based on Kelvin Probe Force Microscopy Surface Potential Measurements
نویسندگان
چکیده
In this article we investigate the effect of relative humidity on dielectric charging/discharging processes in electrostatically actuated MEMS devices. The assessment procedure is based on surface potential measurements using Kelvin Probe Force Microscopy (KPFM) and it targets in this specific work PECVD silicon nitride films in view of application in electrostatic capacitive RF MEMS switches. Charges have been injected through the AFM tip and the induced surface potential has been measured under different relative humidity levels. The impact of the charge injection duration and the bias level as well as bias polarity applied during the charge injection step, have been explored. Finally, the effect of the dielectric film thickness under different relative humidity levels has been assessed through depositing SiN films with different thicknesses.
منابع مشابه
On the reliability of electrostatic NEMS/MEMS devices: Review of present knowledge on the dielectric charging and stiction failure mechanisms and novel characterization methodologies
This paper reviews the state of the art knowledge related to critical failure mechanisms in electrostatic microand nano-electromechanical systems (MEMS and NEMS) which are the dielectric charging and stiction. It describes also the recent employed nanoscale characterization techniques for these phenomena based on Kelvin probe force microscopy (KPFM) and force–distance curve measurements. The in...
متن کاملEffect of deposition reactive gas ratio , RF power and substrate temperature on the charging / discharging processes in PECVD silicon nitride films based on induced surface potential and adhesive force measurements using Atomic force microscopy
The dependence of the electrical properties of silicon nitride on the deposition conditions used to prepare it and consequently on material stoichiometry has not been fully understood. In the present study, the influence of plasma-enhanced chemical vapor deposition (PECVD) conditions on the dielectric charging of SiNx films is investigated. The work targets mainly the dielectric charging phenom...
متن کاملA Mim Capacitor Study of Dielectric Charging for Rf Mems Capacitive Switches
MIM capacitors are considered equally important devices for the assessment of dielectric charging in RF MEMS capacitive switches. Beside the obvious similarities between the down state condition of RF MEMS and MIM capacitors there are also some important differences. The paper aims to introduce a novel approach to the study of dielectric charging in MEMS with the aid of MIM capacitors by combin...
متن کاملReliability assessment of electrostatically driven MEMS devices: based on a pulse-induced charging technique
The charging mechanism of electrostatically driven MEMS devices was investigated. This paper shows experimental results of (i) electrostatic discharge (ESD) experiments, (ii) charging mechanism modelling and (iii) Kelvin probe force microscopy tests. It highlighted dielectric failure signature occurred under ESD events and allowed understanding of the underlying breakdown mechanism. A further s...
متن کاملA study of deposition conditions on charging properties of PECVD silicon nitride films for MEMS capacitive switches
Keywords: RF MEMS capacitive switch Dielectric charging Silicon nitride PECVD method a b s t r a c t The present paper aims to provide a better insight to the electrical characteristics of silicon nitride films that have been deposited with PECVD method under different conditions. The effect of film thickness, substrate temperature and the frequency that produces the plasma in PECVD method on t...
متن کامل