An Electret-based Pressure Sensitive Mos Transistor
نویسندگان
چکیده
The operation of the Metal Oxide Semiconductor Field Effect Transistor (MOSFET) is based on the fact that the lateral conductivity of silicon at the silicon dioxide-silicon interface strongly depends on the transverse electric field in the oxide. Adding a small air-filled spacer between metal gate and oxide, and applying a voltage across the insulator on top of the silicon, the lateral conductivity can become pressure sensitive. The generation of the electric field in the insulator can however also be provided by means of an electret. In this paper the integrated Electret-MOSFET based pressure sensor is presented with respect to its theory, realization and performance. .
منابع مشابه
A Theoretical Analysis of the Electret Air-gap Field- Effect Structure for Sensor Applications
In order to develop a capacitive solid state sensor that makes use of an electret, a theoretical analysts 1s given of an electret air-gap held-effect structure This structure 1s basically an MOS transistor with a movable gate and can thus be considered as a pressure-sensltlve field effect transistor It 1s shown that the addition of a metal layer on top of the semlconductor-oxide increases the s...
متن کاملA Micro-Machined Microphone Based on a Combination of Electret and Field-Effect Transistor
Capacitive-type transduction is now widely used in MEMS microphones. However, its sensitivity decreases with reducing size, due to decreasing air gap capacitance. In the present study, we proposed and developed the Electret Gate of Field Effect Transistor (ElGoFET) transduction based on an electret and FET (field-effect-transistor) as a novel mechanism of MEMS microphone transduction. The ElGoF...
متن کاملGate structural engineering of MOS-like junctionless Carbon nanotube field effect transistor (MOS-like J-CNTFET)
In this article, a new structure is presented for MOS (Metal Oxide Semiconductor)-like junctionless carbon nanotube field effect transistor (MOS-like J-CNTFET), in which dual material gate with different work-functions are used. In the aforementioned structure, the size of the gates near the source and the drain are 14 and 6 nm, respectively, and the work-functions are equal and 0.5 eV less tha...
متن کاملGate structural engineering of MOS-like junctionless Carbon nanotube field effect transistor (MOS-like J-CNTFET)
In this article, a new structure is presented for MOS (Metal Oxide Semiconductor)-like junctionless carbon nanotube field effect transistor (MOS-like J-CNTFET), in which dual material gate with different work-functions are used. In the aforementioned structure, the size of the gates near the source and the drain are 14 and 6 nm, respectively, and the work-functions are equal and 0.5 eV less tha...
متن کاملAn MOS Transistor Model for Analog Circuit Design
This paper presents a physically based model for the metal–oxide–semiconductor (MOS) transistor suitable for analysis and design of analog integrated circuits. Static and dynamic characteristics of the MOS field-effect transistor are accurately described by single-piece functions of two saturation currents in all regions of operation. Simple expressions for the transconductance-to-current ratio...
متن کامل