Kinematic Analysis and Simulation of a 6-DOF Industrial Manipulator
نویسندگان
چکیده
Firstly, model of a 6-DOF articulate manipulator was set up in MATLAB, then kinematic analysis and simulation of this manipulator was studied. Secondly, it was found to acquire the desired configuration within the given time limits with irregular motion pattern along the end-effector path. Simulation results showed that the manipulator was capable of light material handling and transfer in an assembly line at low speeds.
منابع مشابه
Kinematic and Dynamic Analysis of Tripteron, an Over-constrained 3-DOF Translational Parallel Manipulator, Through Newton-Euler Approach
In this research, as the main contribution, a comprehensive study is carried out on the mathematical modeling and analysis of the inverse kinematics and dynamics of an over-constraint three translational degree-of-freedom parallel manipulator. Due to the inconsistency between the number of equations and unknowns, the problem of obtaining the constraint forces and torques of an over-constraint m...
متن کاملDesign and Kinematic Analysis of a 4-DOF Serial-Parallel Manipulator for a Driving Simulator
This paper presents the kinematic analysis and the development of a 4-degree-of-freedom serial-parallel mechanism for large commercial vehicle driving simulators. The degrees of freedom are selected according to the target maneuvers and the structure of human motion perception organs. Several kinematic properties of parallel part of the mechanism under study are investigated, including the inve...
متن کاملKinematic Synthesis of Parallel Manipulator via Neural Network Approach
In this research, Artificial Neural Networks (ANNs) have been used as a powerful tool to solve the inverse kinematic equations of a parallel robot. For this purpose, we have developed the kinematic equations of a Tricept parallel kinematic mechanism with two rotational and one translational degrees of freedom (DoF). Using the analytical method, the inverse kinematic equations are solved for spe...
متن کامل19 A Novel 4 - DOF Parallel Manipulator H 4
Parallel manipulators have the advantages of high stiffness and low inertia compared to serial mechanisms. Based on the Steward-Gough platform architecture, a lot of 6-DOF mechanical devices have been proposed. The 6-DOF parallel manipulators suffer from a small workspace, complex mechanical design, and difficult motion generation and control due to their complex kinematic analysis. To overcome...
متن کاملANFIS+PID Hybrid Controller Design for Controlling of a 6-DOF Robot Manipulator and its Error Convergence Analysis
In this paper, an ANFIS+PID hybrid control policy has been addressed to control a 6-degree-of freedom (6-DOF) robotic manipulator. Then its error convergence has been also evaluated. The ability to formulate and estimate the system uncertainties and disturbances along with system dynamics and rejecting the disturbances effect are some advantages of the proposed method in comparing with the co...
متن کامل