The influence of oxidation of membrane thiol groups on lysosomal proton permeability.

نویسندگان

  • F Y Wan
  • Y N Wang
  • G J Zhang
چکیده

The influence of oxidation of membrane thiol groups on lysosomal proton permeability was studied by measuring lysosomal pH with FITC-conjugated dextran, determining the membrane potential with 3,3'-dipropylthiadicarbocyanine iodide and monitoring their proton leakage with p-nitrophenol. Residual membrane thiol groups were measured with 5,5'-dithiobis-(2-nitrobenzoic acid). The lysosomal membrane thiol groups were modified by treatment with diamide and dithiothreitol. SDS/PAGE revealed aggregations of the membrane proteins induced by the treatment of lysosomes with diamide. The cross-linkage of proteins could be abolished by subsequent treatment with dithiothreitol, indicating that the proteins were linked via disulphide bonds. Treating the lysosomes with diamide decreased their membrane thiol groups and caused increases in lysosomal pH, membrane potential and proton leakage, which could be reversed by treatment of the lysosomes with dithiothreitol. This indicates that the lysosomal proton permeability can be increased by oxidation of the membrane thiol groups and restored to the normal level by reduction of the groups. Treatment of the lysosomes with N-ethylmaleimide reduced their membrane thiol groups but did not change the lysosomal pH or their degree of proton leakage. It suggests that protein aggregation may be an important mechanism for the increase in lysosomal proton permeability. The results raise the possibility that the proton permeability of lysosomes in vivo may be affected by the redox states of their membrane thiol groups.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Modified CNTs/Nafion composite: The role of sulfonate groups on the performance of prepared proton exchange methanol fuel cell’s membrane

A novel Nafion®-based nanocomposite membrane was synthesized to be applied as direct methanol fuel cells (DMFCs). Carbon nanotubes (CNTs) were coated with a layer of silica and then reacted by chlorosulfonic acid to produce sulfonate-functionalized silicon dioxide coated carbon nanotubes (CNT@SiO2-SO3H). The functionalized CNTs were then introduced to Nafion®, and subsequently, methanol permeab...

متن کامل

Influence of membrane physical state on lysosomal potassium ion permeability.

Lysosomal permeability to potassium ions is an important property of the organelle. Influence of the membrane physical state on the potassium ion permeability of isolated lysosomes was assessed by measuring the membrane potential with bis(3-propyl-5-oxoisoxazol-4-yl)pentamethine oxonol and monitoring the lysosomal proton leakage with p-nitrophenol. The membrane fluidity of lysosomes was modulat...

متن کامل

Electrochemical Study of Hydrogen Adsorption/Reduction (HAR) Reaction on Graphene Oxide as Electrocatalyst for Proton Exchange Membrane Fuel Cells

In the current work, graphene oxide (GO) samples were prepared at room temperature from graphite flakes using a modified Hummer's method to produce metal-free electrocatalysts. The effect of the duration of the oxidation process on the structural, chemical and physical characteristics of the GO samples was evaluated using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), ...

متن کامل

Fabrication and Characterization of a Conductive Proton Exchange Membrane Based on Sulfonated Polystyrenedivinylbenzene Resin-Polyethylene (SPSDR-PE): Application in Direct Methanol Fuel Cells

A novel proton exchange membrane has been prepared using sulfonated poly(styrene-divinylbenzene) resin(SPSDR)–polyethylene(PE). The membrane is characterized by FT-IR, SEM and TGA/DSC. Water uptake, oxidative resistance, ionic conductivity and methanol permeability are measured to evaluate its performance in a direct methanol fuel cell. The on-set degradation temp...

متن کامل

Functionalized and Electrospun Polymeric Materials as High-Performance Membranes for Direct Methanol Fuel Cell: A Review

Proton exchange membranes (PEM) for a direct methanol fuel cell (DMFC) have main drawbacks which are methanol permeability, reduced proton conductivity and the cost of the membrane. This paper reviews different polymeric materials such as fluorinated, non-fluorinated, acid-base complex, and composite membranes for DMFC. Currently, nonfluorinated membranes gain a lot of atte...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • The Biochemical journal

دوره 360 Pt 2  شماره 

صفحات  -

تاریخ انتشار 2001