Load Transfer Issues in the Tensile and Compressive Behavior of Multiwall Carbon Nanotubes
نویسندگان
چکیده
Carbon nanotubes (CNT) are considered to be ultra strong and stiff reinforcements for structural composite applications. The load transfer between the inner and outer nanotubes in multiwall carbon nanotubes (MWCNT) has to be clearly understood to realize their potential in not only composites, but also other applications such as nano-springs and nano-bearings. In this paper, we study the load transfer between the walls of multiwall nanotubes both in tension and compression using molecular dynamics simulations. It is found that very minimal load is transferred to the inner nanotube during tension. The load transfer in compression of capped nanotubes is much greater than that in tension. In the case of uncapped nanotubes, the inner nanotube is deformed in bending, only after the outer nanotube is extensively deformed by buckling. It is found that the presence of a few interstitial atoms between the walls of multiwall nanotube can improve the stiffness and enhance the load transfer to the inner nanotubes both in tension and compression.
منابع مشابه
Enhancing mechanical properties of multiwall carbon nanotubes via sp3 interwall bridging.
Molecular dynamics (MD) simulations under transverse shear, uniaxial compression, and pullout loading configurations are reported for multiwall carbon nanotubes (MWCNTs) with different fraction of interwall sp3 bonds. The interwall shear coupling in MWCNTs is shown to have a strong influence on load transfer and compressive load carrying capacity. A new continuum shear-coupled-shell model is de...
متن کاملLoad transfer and deformation mechanisms in carbon nanotube-polystyrene composites
Multiwall carbon nanotubes have been dispersed homogeneously throughout polystyrene matrices by a simple solution-evaporation method without destroying the integrity of the nanotubes. Tensile tests on composite films show that 1 wt % nanotube additions result in 36%–42% and ;25% increases in elastic modulus and break stress, respectively, indicating significant load transfer across the nanotube...
متن کاملDetecting compressive strain by evaluation of Raman spectroscopy of the multiwall Carbon nanotubes/TiO2 nanocomposites
Functionalized Multi-walled carbon nanotubes (f-MWCNTs) which are modified using nitric acid and sulfuric acid were evaluated to synthesize a uniform nanocomposite via application of TiO2. The f-MWCNTs-TiO2 nanocomposites have been produced via using the chemical simple two-step method. To characterize the structural analysis, scanning electron microscopy...
متن کاملVoltammmetric Determination of Captopril Using Multiwall Carbon Nanotubes Paste Electrode in the Presence of Isoproterenol as a Mediator
The electrocatalytic oxidation of captopril (CAP) was studied by modified carbon nanotubes paste electrode in the presence of isoproterenol (ISPT) using cyclic voltammetry (CV), chronoamperometry and square wave voltammetry (SWV). Also, the values of catalytic rate constant (k), and electron transfer coefficient (α) for CAP were calculated. The mechanism of CA electrochemical behavior at the mo...
متن کاملVoltammmetric Determination of Captopril Using Multiwall Carbon Nanotubes Paste Electrode in the Presence of Isoproterenol as a Mediator
The electrocatalytic oxidation of captopril (CAP) was studied by modified carbon nanotubes paste electrode in the presence of isoproterenol (ISPT) using cyclic voltammetry (CV), chronoamperometry and square wave voltammetry (SWV). Also, the values of catalytic rate constant (k), and electron transfer coefficient (α) for CAP were calculated. The mechanism of CA electrochemical behavior at the mo...
متن کامل