Control of a Heat Exchanger Using an Iterative Design Approach
نویسندگان
چکیده
This paper deals with the control of the heat exchangers. Due to the resonant effect on this systems, simplified lumped parameters models obtained from the step response can be not enough appropriate to controller design if high performance is required. To design the control, instead of looking for a precise heat exchanger model obtained through complex experiments and sophisticated parameter estimation methods, the use of an iterative approach is suggested.Copyright c ©2005 IFAC.
منابع مشابه
A Double Pipe Heat Exchanger Design and Optimization for Cooling an Alkaline Fuel Cell System
In the presented research, heat transfer of a mobile electrolyte alkaline fuel cell (AFC) (which the electrolyte has cooling role of system) has been considered. Proper control volumes of system with specific qualification have been chosen. Consequently, heat and mass transfer in control volumes have been assessed. Considerations on them and contributed models lead to approve a double tube heat...
متن کاملAnalytical and comparative investigations on counter flow heat exchanger using computational fluid dynamics
This paper presents a comprehensive and exclusive thermodynamic analysis of counter flow heat exchanger under various operating and geometrical conditions. Analysis system (ANSYS) workbench 14.0 has been used for computational analysis and comparison with previous literature has been carried out in view of variable temperature and mass flow rate of hot and cold fluids. An analytical and statist...
متن کاملEstimating the unknown heat flux on the wall of a heat exchanger internal tube using inverse method
In the design of heat exchangers, it is necessary to determine the heat transfer rate between hot and cold fluids in order to calculate the overall heat transfer coefficient and the heat exchanger efficiency. Heat transfer rate can be determined by inverse methods. In this study, the unknown space-time dependent heat flux imposed on the wall of a heat exchanger internal tube is estimated by app...
متن کاملLongitudinal Conduction in Cross Flow Heat Exchanger with Condensation
The deterioration of the performance of a cross flow heat exchanger with condensation due to the longitudinal conduction was investigated. For a relatively small change of wall temperature along the flow directions which was shown to be common in many applications, the energy equations were solved numerically. An iterative method was used to solve the resulting equations of the finite differenc...
متن کاملCost Effective Heat Exchanger Network Design with Mixed Materials of Construction
This paper presents a simple methodology for cost estimation of a near optimal heat exchanger network, which comprises mixed materials of construction. Intraditional pinch technology and mathematical programming it is usually assumed that all heat exchangers in a network obey a single cost model. This implies that all heat exchangers in a network are of the same type and use the same mate...
متن کامل