The foot as a shock absorber.

نویسندگان

  • E P Salathé
  • G A Arangio
  • E P Salathé
چکیده

A mathematical analysis of the deformation of the foot is developed to determine the role that stretch of ligaments and tendons plays in absorbing shock following impact. Our analysis is based on an anatomical biomechanical model that includes each of the bones of the foot. We calculate the time course of the deflection of the joints and the elongation of the ligaments and tendons and determine the ground reaction force acting on the heel. Quasi-linear viscoelastic theory is used for soft tissue constitutive relationships. With biomechanical data selected from the literature, we obtain a vertical force impact peak of 8000 N, occurring at 16 ms following heel strike. This is of higher magnitude and shorter duration than is found experimentally, as is to be expected, since we did not include the heel pad in our model and we assumed that the impact surface was ideally rigid.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Design and Analysis of Graded Honeycomb Shock Absorber for Increasing the Safety of Passengers in Armored Vehicles Exposed to Mine Explosion

Protecting armored vehicles from mine explosion can lead to the survival of thousands of people exposed to this risk. Very purpose, shock absorbers such as honeycomb structures can be applied for crashworthiness improvement. In this study, graded honeycomb structure is primarily introduced as a shock absorber, followed by the introduction of its absorbed energy and the force and acceleration ap...

متن کامل

Conceptual Design of Single-Acting Oleo-Pneumatic Shock Absorber in Landing Gear with Combined Method

Landing gear is a structure that is mounted under the fuselage and helps the aircraft in takeoffs and landings. The most important duty of landing gear is the control of vibration exerted on the system through the shock absorber which is a common component to all the landing gear. Considering the importance of this issue, the necessity of investigating shock absorber with features such as high ...

متن کامل

Numerical and Analytical Investigation in Radiated Noise by a Shock-Absorber

In this article, the radiated noise by a shock-absorber is studied. This particular shock-absorber is used in a heavy-gauge shearing line in order to stop the cut steel sheets. Three steps are followed to evaluate the propagated sound in the surroundings; first of all, the plate vibration response is specified after the impact. Secondly, the edges of the plate are substituted by a set of the mo...

متن کامل

Synthesis and Characterization of Mechanical Behavior and Thermal Shock Resistance of Macro-Porous SiC Solar Absorber

The concentrated solar power (CSP) is one of the renewable energy sources in which solar irradiation heat energy will be used in a steam turbine to generate electrical grid. Solar radiation is absorbed by a solar receiver reactor on the surface of a porous solar absorber. In this survey, synthesis and mechanical/thermal characterization of micro-porous silicon carbide (SiC) absorber to be used ...

متن کامل

Effects of the stimulation of β2-adrenoceptors of the the basolateral amygdala on anxiety-like behaviors following electrical foot-shock stress in male rat

Introduction: The basolateral amygdala (BLA) is a key structure that integrated anxiety information. It is suggested that baso-lateral area of amygdala receives a dense norepinephrine innervation from the locus coeruleus nucleus. Furthermore, stress increased norepinephrine secretion in the BLA. In the present study, we examined the effects of the stimulation of β2-adrenoceptors in the BLA on a...

متن کامل

Oscillation Control of Aircraft Shock Absorber Subsystem Using Intelligent Active Performance and Optimized Classical Techniques Under Sine Wave Runway Excitation (TECHNICAL NOTE)

This paper describes third aircraft model with 2 degrees of freedom. The aim of this study is to develop a mathematical model for investigation of adoptable landing gear vibration behavior and to design Proportional Integration Derivative (PID) classical techniques for control of active hydraulic nonlinear actuator. The parameters of controller and suspension system are adjusted according to be...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Journal of biomechanics

دوره 23 7  شماره 

صفحات  -

تاریخ انتشار 1990