Estimation of Interfacial Shear in Ceramic Composites from Frictional Heating Measurements
نویسنده
چکیده
A new approach for estimating the interfacial frictional shear stress in fiber-reinforced ceramics is presented. The approach is based upon measurement of the temperature rise which occurs during the cyclic loading of ceramic composites. This temperature rise, which is caused by the frictional slip of fibers within the composite, is related to the level of frictional shear stress which exists along debonded interfaces. To illustrate the technique, the interfacial shear stress in a unidirectional Nicalon-fiber calcium aluminosilicate matrix composite was determined at ambient temperature. [
منابع مشابه
Frictional heating in a unidirectional fibre-reinforced ceramic composite
Holmes and Shuler [1] recently found that significant internal heating occurs during the cyclic loading of fibre-reinforced ceramics. In their investigation, conducted with cross-ply carbon fibre/SiC matrix composites (hereafter referred to as Cf/SiC), it was observed that the extent of internal heating was strongly influenced by the peak fatigue stress and loading frequency. For example, durin...
متن کاملViscoelasticity in carbon nanotube composites.
Polymer composites reinforced by carbon nanotubes have been extensively researched for their strength and stiffness properties. Unless the interface is carefully engineered, poor load transfer between nanotubes (in bundles) and between nanotubes and surrounding polymer chains may result in interfacial slippage and reduced performance. Interfacial shear, although detrimental to high stiffness an...
متن کاملAnalysis of Laminated Soft Core Sandwich Plate Having Interfacial Imperfections by an Efficient C0 FE Model
An efficient C0 continuous two dimensional (2D) finite element (FE) model is developed based on a refined higher order shear deformation theory (RHSDT) for the static analysis of soft core sandwich plate having imperfections at the layer interfaces. In this (RHSDT) theory, the in-plane displacement field for the face sheets and the core is obtained by superposing a globally varying cubic displa...
متن کاملA model for inter-laminar shear stress in laminated composites
The paper presents an analytical model for the estimation of shear stress at the interface of adhesively bonded layers in laminated composites. For this purpose, a new shear stress function is proposed that accounts for the influence of shear lag in laminates assembled using adhesive layers of different types and thicknesses. In addition to the estimation of interfacial stress, the function can...
متن کاملEffect of Interface Modified by Graphene on the Mechanical and Frictional Properties of Carbon/Graphene/Carbon Composites
In this work, we developed an interface modified by graphene to simultaneously improve the mechanical and frictional properties of carbon/graphene/carbon (C/G/C) composite. Results indicated that the C/G/C composite exhibits remarkably improved interfacial bonding mode, static and dynamic mechanical performance, thermal conductivity, and frictional properties in comparison with those of the C/C...
متن کامل