Active Filter Design Using OTA Realization
نویسندگان
چکیده
The OTA is an amplifier whose differential input voltage produces an output current. Thus, it is a voltage controlled current source. Operational transconductance amplifier is one of the most significant building-blocks in integrated continuous-time filters. We show that the operational transconductance amplifier (OTA), as the active element in basic building blocks. In this paper Low pass filter is realized using OTA realization. SPICE simulation showed that they are suitable for real time application. KeywordsOTA, CMOS IC Design, OTA-C Low Pass filter, cadence, VCCS.
منابع مشابه
Design of Gate-Driven Quasi Floating Bulk OTA-Based Gm–C Filter for PLL Applications
The advancement in the integrated circuit design has developed the demand for low voltage portable analog devices in the market. This demand has increased the requirement of the low-power RF transceiver. A low-power phase lock loop (PLL) is always desirable to fulfill the need for a low power RF transceiver. This paper deals with the designing of the low power transconductance- capacitance (Gm-...
متن کاملImplementation of the OTA Circuit Design for Gm-C Active Filter
In this study, we designed the OTA circuit for Gm-C active filter using the direct transform method that has capable of various frequency tuning. The OTA make it enable filter design that can be used in various frequency bands due to control trans-conductance by using external voltage control. Our OTA circuit can be used for active filter of CDMA also other device that use other frequency bands...
متن کاملMultifunction RF Filters Using OTA
In this paper the procedure of RF filter design using two active elements OTA is shown. The general method of filter design using OTA amplifiers, when the fully connected feedback network was designed around the two OTA elements, is shown. Autonomous circuits were gradually picked out from this general arrangement, using two to five passive elements. These autonomous circuits then serve as an i...
متن کاملOta-c Filters with Finite Zeros and without Floating Capacitors
In this paper we present a novel technique for OTA-C filter realizations with finite zeros based on doubly loaded passive ladder networks. Only grounded capacitors are needed; all floating capacitors are replaced with active simulations eliminating bottom-plate parasitic capacitors and non-observable poles. Bandpass, highpass and bandstop filters are easily obtained from a lowpass OTA-C prototy...
متن کاملRealization of Current-mode Quadrature Oscillator Based on Third Order Technique
This article presents a 3rd current-mode quadrature oscillator using current controlled current conveyor transconductance amplifier (CCCCTA) and operational transconductance amplifier (OTA) as active element as active elements. The proposed circuit is realized from a noninverting lossless integrator and an inverting second order low-pass filter. The oscillation condition and oscillation frequen...
متن کامل