Local friction at a sliding interface between an elastomer and a rigid spherical probe.

نویسندگان

  • A Chateauminois
  • C Fretigny
چکیده

This paper reports on spatially resolved measurements of the shear stress distribution at a frictional interface between a flat rubber substrate and a glass lens. Silicone rubber specimens marked close to their surface by a colored pattern have been prepared in order to measure the surface displacement field induced by the steady-state friction of the spherical probe. The deconvolution of this displacement field then provides the actual shear stress distribution at the contact interface. When a smooth glass lens is used, a nearly constant shear stress is achieved within the contact. On the other hand, a bell-shaped shear stress distribution is obtained with rough lenses. These first results suggest that simple notions of real contact area and constant interface shear stress cannot account for the observed changes in local friction when roughness is varied.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Probing the micromechanics of a multi-contact interface at the onset of frictional sliding.

Digital Image Correlation is used to study the micromechanics of a multi-contact interface formed between a rough elastomer and a smooth glass surface. The in-plane elastomer deformation is monitored during the incipient sliding regime, i.e. the transition between static and sliding contact. As the shear load is increased, an annular slip region, in coexistence with a central stick region, is f...

متن کامل

Gemini Interfaces in Aqueous Lubrication with Hydrogels

The sliding interfaces found in the body— within the eyes, the digestive system, and the articulating joints, for example—are soft and permeable yet extremely robust, possessing low friction. The common elements among these systems are hydrophilic biopolymer networks that provide physical surfaces, elasticity, and fluid permeability. Stiff, impermeable probes are traditionally used to assess th...

متن کامل

A Coupled Rigid-viscoplastic Numerical Modeling for Evaluating Effects of Shoulder Geometry on Friction Stir-welded Aluminum Alloys

Shoulder geometry of tool plays an important role in friction-stir welding because it controls thermal interactions and heat generation. This work is proposed and developed a coupled rigid-viscoplastic numerical modeling based on computational fluid dynamics and finite element calculations aiming to understand these interactions. Model solves mass conservation, momentum, and energy equations in...

متن کامل

Sliding friction between an elastomer network and a grafted polymer layer: the role of cooperative effects

We study the friction between a flat solid surface where polymer chains have been end-grafted and a cross-linked elastomer at low sliding velocity. The contribution of isolated grafted chains’ penetration in the sliding elastomer has been early identified as a weakly velocity dependent pull-out force. Recent experiments have shown that the interactions between the grafted chains at high graftin...

متن کامل

Phase transition of the dry friction between crystalline surfaces induced by normal load

A major source of energy dissipation and surface wear is the kinetic friction at the interfaces of sliding bodies. Traditionally, on a macroscopic scale, this undesirable effect is reduced with lubricating the surfaces by introducing oil into their interface. An interesting phenomenon, called superlubricity, has been reported on a nanometer scale where dry (without lubricant oil) fruition and w...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • The European physical journal. E, Soft matter

دوره 27 2  شماره 

صفحات  -

تاریخ انتشار 2008