Effect of Adhesive Viscoelasticity on the Creep Behaviour of FRP Strengthened Concrete Beams
نویسنده
چکیده
This paper focuses on the effect of the viscoelasticity of the adhesive layer on the flexural creep response of reinforced concrete beams strengthened with composite materials. A theoretical model is developed, which considers the strengthened beam as a layered structure that consists of the reinforced concrete beam, the adhesive layer, and the FRP strip, and accounts for the creep of each component. The model also accounts for cracking and tension-stiffening of the reinforced concrete and for the deformability of the adhesive layer in shear and through its thickness, which allows the evaluation of the edge and interfacial stresses. A parametric study of different viscoelastic material properties of the adhesive is presented, and their effect on the time variation of the internal forces and edge stresses is investigated.
منابع مشابه
Flexural Testing of High Strength Reinforced Concrete Beams Strengthened with CFRP Sheets
The objective of this study is to investigate the effectiveness of externally bonded CFRP sheets to increase the flexural strength of reinforced high strength concrete (HSC) beams. Four-point bending flexural tests to complete failure on six concrete beams, strengthened with different layouts of CFRP sheets were conducted. Three-dimensional nonlinear finite element (FE) models were adopted by A...
متن کاملNumerical Study on the Flexural Behaviour of Concrete Beams Reinforced by GFRP Bars
Enhancement of the response of reinforced concrete (RC) beams using fiber-reinforced polymer (FRP) reinforcement bars has become a popular structural technique over the past two decades due to the well-known advantages of FRP composites including their high strength-to-weight ratio and excellent corrosion resistance. Thisstudy presents n...
متن کاملDebonding Failure of CFRP Reinforced Concrete Beams and In - Situ Monitoring Schemes
Fiber Reinforced Polymer (FRP) systems have gained much popularity as a method for reinforcing existing concrete structures. However a variety of sudden failure methods, such as debonding, delamination, and creep rupture have led to the development of code limitations on the strength that an FRP system can be considered to provide. The uncertainty brought on by the failure methods mentioned abo...
متن کاملOPTIMUM RESISTANCE FACTOR FOR REINFORCED CONCRETE BEAMS RETROFITTED WITH U-WRAP FRP
The use of fiber reinforced polymer (FRP) U-wrap to rehabilitate concrete beams has increased in popularity over the past few years. As such, many design codes and guidelines have been developed to enable designers to use of FRP for retrofitting reinforced concrete beams. FIB is the only guideline for design which presents a formula for torsional capacity of concrete beams streng...
متن کاملExperimental and Numerical Investigation of Two Fixed-End RC Beams Strengthened With CFRP Bars in NSM Method
Fiber reinforced polymer (FRP) material is currently being produced in different configurations and widely used to strengthen and retrofit concrete structures and bridges. It is also possible to apply other strengthening methods without changing the appearance or the dimensions of the structure. Near Surface Mounted (NSM) is a recent strengthening method using CFRP bars (rods or laminate strips...
متن کامل