Redetermination of tantalum pentabromide, (TaBr5)2
نویسندگان
چکیده
Crystals of di-μ-bromido-bis-[tetra-bromidotantalum(V)], (TaBr(5))(2), were obtained by recrystallization at 773 K. A first crystal structure study of (TaBr(5))(2) was reported by Rolsten [J. Am. Chem. Soc. (1958) ▶, 80, 2952-2953], who analysed the powder diffraction pattern and came to the conclusion that it crystallizes isotypically with (NbBr(5))(2) in a primitive ortho-rhom-bic cell. These findings are not in agreement with our current results of a monoclinic C-centred structure. (TaBr(5))(2) is isotypic with α-(NbCl(5))(2). The crystal structure contains [TaBr(6)] octa-hedra sharing common edges forming [TaBr(5)](2) dimers. Two crystallographically independent dimers with symmetries m and 2/m and Ta⋯Ta distances of 4.1574 (11) and 4.1551 (15) Å, respectively, are present in the structure.
منابع مشابه
Mechanical Properties and Microstructural Evolution of Ta/TaNx Double Layer Thin Films Deposited by Magnetron Sputtering
Crystalline tantalum thin films of about 500nm thickness were deposited on AISI 316L stainless steel substrate using magnetron sputtering. To investigate the nano-mechanical properties of tantalum films, deposition was performed at two temperatures (25°C and 200°C) on TaNx intermediate layer with different N2/Ar flow rate ratio from 0 to 30%. Nano-indentation was performed to obtain the mechani...
متن کاملTantalum/ Nitrogen and n-type WO3 semiconductor/FTO structures as a cathode for the future of nano devices
In the last decades an important number of research papers published on nano chip electrode and cathode electrochromic materials. Tantalum (Ta) with so high melting point can be as a good candidate for the future of nano chip devices. However, its surface has not enough trap centers and/or occupation states, so nitrogen ions exposed on Ta surafce, may solve this problem. For this purpose, in th...
متن کاملEnhanced of Nano-mechanical Properties of NiTi Alloy by Applied Nanostructured Tantalum Nitride Coating with Magnetron Sputtering method
Nowadays, suitable protective properties of tantalum nitride coatings, such as hardness, abrasion resistance and high corrosion resistance lead to increasing its application in medical engineering and improving the biological behavior of titanium and its alloys. In this research, nanostructured tantalum nitride coating was applied on the NiTi alloy by magnetron sputtering method. Then, the ...
متن کاملInfluence of Electrolyte Composition and Voltage on the Microstructure and Growth Mechanism of Plasma Electrolytic Oxidation (PEO) Coatings on Tantalum: A Review
Recently, PEO process of tantalum has been developed as a method of producing corrosion-resistant, hard, wear-resistant, and biocompatible as well as having good adhesion coatings. In this review, we present the results of PEO process of tantalum in three main electrolytes. This review tries to measure the effect of electrolyte composition and voltage that were used within PEO procedure on the ...
متن کاملSynthesis of Tantalum Carbide/Boride Nano Composite Powders by Mechanochemical Method
In this study, mechanochemcical process(MCP) is applied to synthesize ultrafine TaC powders. In this research, nano powder composite TaC-TaB2 was produced using mixtures of tantalum carbide and boron carbide as raw materials via mechanochemical process. The phase formation characterization during process was utilized by X-ray diffractometry (XRD). The morphology of synthesized powder was studie...
متن کامل