Data analysis on physical and mechanical properties of cassava pellets

نویسندگان

  • Pelumi E. Oguntunde
  • Oluyemisi A. Adejumo
  • Oluwole A. Odetunmibi
  • Hilary I. Okagbue
  • Adebowale O. Adejumo
چکیده

In this data article, laboratory experimental investigation results carried out at National Centre for Agricultural Mechanization (NCAM) on moisture content, machine speed, die diameter of the rig, and the outputs (hardness, durability, bulk density, and unit density of the pellets) at different levels of cassava pellets were observed. Analysis of variance using randomized complete block design with factorial was used to perform analysis for each of the outputs: hardness, durability, bulk density, and unit density of the pellets. A clear description on each of these outputs was considered separately using tables and figures. It was observed that for all the output with the exception of unit density, their main factor effects as well as two and three ways interactions is significant at 5% level. This means that the hardness, bulk density and durability of cassava pellets respectively depend on the moisture content of the cassava dough, the machine speed, the die diameter of the extrusion rig and the combinations of these factors in pairs as well as the three altogether. Higher machine speeds produced more quality pellets at lower die diameters while lower machine speed is recommended for higher die diameter. Also the unit density depends on die diameter and the three-way interaction only. Unit density of cassava pellets is neither affected by machine parameters nor moisture content of the cassava dough. Moisture content of cassava dough, speed of the machine and die diameter of the extrusion rig are significant factors to be considered in pelletizing cassava to produce pellets. Increase in moisture content of cassava dough increase the quality of cassava pellets.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Preparation and evaluation of carvacrol pellets based on PVP solid-dispersion by extrusion-spheronization technique

Background and objectives: Carvacrol is one of the main pharmacologically active components of Thymus vulgaris essential oil which has shown several therapeutic effects. There are few works regarding the formulation of essential oils as oral solid dosage forms due to their liquid nature, stability and technical problems. The aim of this study was to combine the solid-d...

متن کامل

Production of of Ibuprofen Pellets Containing High Amount of Rate Retarding Eudragit RL Using PEG400 and Investigation of Their Physicomechanical Properties

Objective(s) The aim of this study was to investigate the possibility of production of ibuprofen pellets with high amount of rate retarding polymer by aid of PEG400 as plasticizer. Materials and Methods Polyethylene glycol (PEG400) in concentrations of 1, 3 or 5% w/w with respect to Eudragit RL was used in production of pellets containing 60% ibuprofen and 40% excipient (2% polyvinylpyrrolid...

متن کامل

Evaluation of ethylcellulose and its pseudolatex (Surelease) in preparation of matrix pellets of theophylline using extrusion-spheronization

Objective(s): This study evaluates the effect of substitution of microcrystalline cellulose (MCC) with ethylcellulose (EC) on mechanical and release characteristics of theophylline pellets. Materials and Methods: The effect of addition of EC was investigated on characteristics of pellets with varying drug content prepared by extrusion-spheronization. Also the effect of type of granulating liqui...

متن کامل

Energy Value of Cassava Products in Broiler Chicken Diets with or without Enzyme Supplementation.

This study investigated the metabolizable energy (ME) intake, net energy of production (NEp), heat production (HP), efficiencies of ME use for energy, lipid and protein retention as well as the performance of broiler chickens fed diets based on cassava chips or pellets with or without supplementation with an enzyme product containing xylanase, amylase, protease and phytase. The two products, ca...

متن کامل

Evaluation of the effect of physical variables on in vitro release of diclofenac pellets using Box-Behnken design

Objective(s): A Box-Behnken design was used for evaluation of Eudragit coated diclofenac pellets. The purpose of this work was to optimize diclofenac pellets to improve the physicochemical properties using experimental design. Materials and Methods: Diclofenac was loaded onto the non-pareil beads using conventional coating pan. Film coating of pellets was done at the same pan. The effect of pla...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 16  شماره 

صفحات  -

تاریخ انتشار 2018