Energy absorption buildup factors of human organs and tissues at energies and penetration depths relevant for radiotherapy and diagnostics

نویسندگان

  • S. R. Manohara
  • S. M. Hanagodimath
  • L. Gerward
چکیده

Energy absorption geometric progression (GP) fitting parameters and the corresponding buildup factors have been computed for human organs and tissues, such as adipose tissue, blood (whole), cortical bone, brain (grey/white matter), breast tissue, eye lens, lung tissue, skeletal muscle, ovary, testis, soft tissue, and soft tissue (4-component), for the photon energy range 0.015-15 MeV and for penetration depths up to 40 mfp (mean free path). The chemical composition of human organs and tissues is seen to influence the energy absorption buildup factors. It is also found that the buildup factor of human organs and tissues changes significantly with the change of incident photon energy and effective atomic number, Z(eff). These changes are due to the dominance of different photon interaction processes in different energy regions and different chemical compositions of human organs and tissues. With the proper knowledge of buildup factors of human organs and tissues, energy absorption in the human body can be carefully controlled. The present results will help in estimating safe dose levels for radiotherapy patients and also useful in diagnostics and dosimetry. The tissue-equivalent materials for skeletal muscle, adipose tissue, cortical bone, and lung tissue are also discussed. It is observed that water and MS20 are good tissue equivalent materials for skeletal muscle in the extended energy range.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

محاسبهْ ضرایب انباشت پرتوگیری تابشهای گاما برای چشمه ‌های نقطه ‌ای در آب و سرب

  Exposure buildup factors for water and lead have been calculated by the Monte-Carlo method for an isotropic point source in an infinite homogeneous medium, using the latest cross secions available on the Internet. The types of interactions considered are ,photoelectric effect, incoherent (or bound-electron Compton). Scattering, coherent (or Rayleigh) scattering and pair production. Fluorescen...

متن کامل

Calculating weighting factors for mixing megavoltage photon beams to achieve desirable dose distribution in Radiotherapy

Introduction: Many studies have shown the effects of delivered dose distribution due to the incident photon energy on the tumor and healthy tissues. The ability to access the most appropriate radiation energy is essential to achieve the optimal treatment planning but there is a serious limitation in number of energies available on radiation therapy machines can restrict it. <s...

متن کامل

Calculating Weighting Factors for Mixing Megavoltage Photon Beams to Achieve Desirable Dose Distribution in Radiotherapy

Background: In radiotherapy, low-energy photon beams are better adapted to the treated volume, and the use of high-energy beams can reduce hot spots in the radiation therapy. Therefore, mixing low and high energies with different ratios can control the rate of hotspots, as well as the dose distribution of the target volume.Material and Methods: The percentage depth doses (PDDs) were calculated ...

متن کامل

Chemical Composition Dependence of Exposure Buildup Factors for Some Biological Materials

Exposure buildup factors for some tissues such as bone compact, Muscle striated, orange articulation wax, red articulation wax, nylon, PMMA and paraffin 2 have been computed using the five parameter geometric progression (GP) fitting method in the energy range of 0.01515.0 MeV, up to the penetration of 40 mean free paths (mfp). The variation of exposure buildup factors for all the selected tiss...

متن کامل

Energy Absorption Buildup factor for some Oxide Glasses: Penetration Depth, Photon Energy and Effective Atomic Number Dependence

In present investigation, the study of gamma ray Energy absorption buildup factors (EABF) for three oxide glasses, viz. CaO-Al2O3, Na2O-SiO2, and Na2O-Al2O3-SiO2. The computations were done by ANSI/ANS-6.4.3 library and interpolation method using the Geometric Progression fitting formula for the energy range from 0.015 to 15 MeV, up to penetration depths 40 mfp (mean free path). The buildup fac...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 12  شماره 

صفحات  -

تاریخ انتشار 2011