A new type of power energy for accelerating chemical reactions: the nature of a microwave-driving force for accelerating chemical reactions
نویسندگان
چکیده
The use of microwave (MW) irradiation to increase the rate of chemical reactions has attracted much attention recently in nearly all fields of chemistry due to substantial enhancements in reaction rates. However, the intrinsic nature of the effects of MW irradiation on chemical reactions remains unclear. Herein, the highly effective conversion of NO and decomposition of H2S via MW catalysis were investigated. The temperature was decreased by several hundred degrees centigrade. Moreover, the apparent activation energy (Ea') decreased substantially under MW irradiation. Importantly, for the first time, a model of the interactions between microwave electromagnetic waves and molecules is proposed to elucidate the intrinsic reason for the reduction in the Ea' under MW irradiation, and a formula for the quantitative estimation of the decrease in the Ea' was determined. MW irradiation energy was partially transformed to reduce the Ea', and MW irradiation is a new type of power energy for speeding up chemical reactions. The effect of MW irradiation on chemical reactions was determined. Our findings challenge both the classical view of MW irradiation as only a heating method and the controversial MW non-thermal effect and open a promising avenue for the development of novel MW catalytic reaction technology.
منابع مشابه
Microwave-assisted Domino Reaction in Organic Synthesis
The fields of combinatorial and automated medicinal chemistry have emerged to meet the increasing requirement of new compounds for drug discovery, where speed is of the essence (Loupy, 2002). In this regard, domino (or tandem, or cascade) reactions where “two or more bond-forming transformations take place under the same reaction conditions without adding additional reagents and catalysts, and ...
متن کاملa New Approximate Solution Technique (Quantized Method) for Simultaneous Gas Solid Reactions
Simultaneous reactions between solids and gases are very important in the chemical and metallurgical processes. In the modeling, the chemical reaction and diffusion of gases must be considered. Therefore, a set of coupled partial differential equations is found. When the kinetic is a function of solid concentration, there is not any analytical solution for these equations. Therefore, numerical ...
متن کاملChemical energy and bottom stirring systems – Cost effective solutions for a better performing EAF
The continuous improvement of EAF performance is crucial for the increase in productivity and cost effectiveness and to render an environmental friendly process. RHI supports these targets by providing a diverse range of refractory and process solutions. Chemical energy in practical operation by injection of gaseous media like oxygen and natural gas, and solid materials like carbon have become ...
متن کاملInvestigation of Auto Ignition Condition under Different Parameters
In this work, the potential of auto-ignition of heavy oil during in-situ combustion (ISC) process was studied. Kinetic studies were carried out using Thermo Gravimetric Analyzer (TGA), Differential Scanning Calorimetry (DSC) and Accelerating Rate Calorimetric (ARC) techniques. Effects of oxygen partial pressure, reservoir pressure and clay on auto ignition condition were investigated on a n...
متن کاملScale-Dependent Dynamic Behavior of Nanowire-Based Sensor in Accelerating Field
The accelerating fields (e. g. centrifugal acceleration and constant acceleration) can change the physical performance of nano-sensors significantly. Herein, a new size-dependent model is developed to investigate the scale-dependent dynamic behavior of nanowire-fabricated sensor operated in an accelerating field. The scale-dependent equation of motion is developed by employing a consolidation o...
متن کامل