Investigation of a High-q Dipole Mode at the Tesla Cavities

نویسندگان

  • N. Baboi
  • M. Dohlus
  • C. Magne
  • A. Mosnier
  • O. Napoly
چکیده

Higher order modes (HOM) can have a destructive influence on the beam emittance in the future linear colliders. Therefore it is important that the quality factor of the high impedance modes be damped under a safe level. Although attentive care was taken in designing the superconducting 9-cell cavities and the HOM couplers for the TESLA collider, a high Q and high impedance mode was discovered in some cavities at the TESLA Test Facility (TTF). In order to discover the reason for which this particular mode is very little damped, a series of investigations have been carried out. The mode frequency is higher for the studied cavities comparatively to others, where this mode seems to be properly damped. Field distribution measurements at the separate cavities show a quasi-trapping of the mode. The simulations and measurements done at individual cavities show that for certain boundary conditions the field is minimum at the location of both HOM couplers in a tube.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

High-current Srf Cavity Design

For high current applications, it is desirable for the cavity shape to have a low longitudinal loss factor and to have a high beam-breakup threshold current. This paper briefly describes three different cavities designed for this purpose: a six-cell elliptical cavity for particles traveling at the speed of light, a two-cell elliptical cavity for subluminal particle speeds, and a single cell cav...

متن کامل

Emittance-imposed Alignment and Frequency Tolerances for the Tesla Linear Collider

One option in building a future 500 GeV c.m. linear collider is to use superconducting 1.3 GHz 9-cell cavities. However, wakefields excited by the bunch train in the TESLA (TeV-Energy Super Conducting Linear Accelerator) collider can resonantly drive the beam into unstable operation such that a BBU (Beam Break Up) mode results or at the very least significant emittance dilution occurs. The larg...

متن کامل

High Precision Sc Cavity Diagnostics with Hom Measurements

Experiments at the FLASH linac at DESY have demonstrated that the Higher Order Modes induced in Superconducting Cavities can be used to provide a variety of beam and cavity diagnostics. The centers of the cavities can be determined from the beam orbit which produces minimum power in the dipole HOM modes. The phase and amplitude of the dipole modes can be used as a high resolution beam position ...

متن کامل

Achievement of 35 MV / m in the Superconducting Nine - Cell Cavities for TESLA 1

The Tera Electronvolt Superconducting Linear Accelerator TESLA is the only linear electron-positron collider project based on superconductor technology for particle acceleration. In the first stage with 500 GeV center-of-mass energy an accelerating field of 23.4 MV/m is needed in the supercon-ducting niobium cavities which are operated at a temperature of 2 K and a quality factor Q 0 of 10 10. ...

متن کامل

Optimization of Beam Injection into the First Accelerating Module at Ttf with Cavity Dipole Mode Signals

The TESLA Test Facility (TTF) is a user facility for intense VUV-FEL light. The facility is densely equipped with diagnostics, essential in obtaining the necessary beam parameters, in particular the low emittance. However there is no dedicated component for alignment of the beam in the accelerating modules, each containing eight superconducting cavities. Large beam offsets can lead to an increa...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2000