Electrooptic Propagation
نویسندگان
چکیده
The EO Propagation objectives are: 1) investigate, develop and evaluate fine and coarse mode aerosol models and their effects on visibility and target detection in visible and IR wavelengths 2) Integrate and develop simple, realistic extinction, scintillation and refractivity models for infrared propagation near the ocean surface, 3) develop and evaluate advanced marine radiance models that are compatible with TAWS and IRTSS 4) develop a consistent physical/chemical/optical model for aerosol particles suitable for inclusion in navy meteorological models.
منابع مشابه
Unified approach to describe optical pulse generation by propagation of periodically phase-modulated CW laser light.
The analysis of optical pulse generation by phase modulation of narrowband continuous-wave light, and subsequent propagation through a group-delay-dispersion circuit, is usually performed in terms of the so-called bunching parameter. This heuristic approach does not provide theoretical support for the electrooptic flat-top-pulse generation reported recently. Here, we perform a waveform synthesi...
متن کاملCoupled-Mode Theory for Guided-Wave Optics
Absrruct-The problem of propagation and interaction of optical radiation in dielectric waveguides is cast in the coupled-mode formalism. This approach is useful for treating problems involving energy exchange between modes. A derivation of the general theory is followed by application to the specific cases of electrooptic modulation, photoelastic and magnetooptic modulation, and optical filt...
متن کاملROADM for Wafer Scale Optical Interconnects
Pairing high-quality factor ( ) silicon-on-insulator microring resonators with rapidly tunable organic electrooptic claddings has allowed the first demonstration of a silicon-organic hybrid electrooptic reconfigurable optical add/drop multiplexer (ROADM). A coplanar electrode geometry provides up to 0.36 GHz/V of electrooptic voltage tuning for each channel, corresponding to an electrooptic coe...
متن کاملThe crossflow piezo-electrooptic effect in crystals. Example of lithium tantalate
In the present paper the thermodynamic and phenomenological descriptions of the crossflow piezo-electrooptic effect in crystals have been made. For example the necessary experimental measurements of this effect have been carried out in the lithium tantalate crystals. For these crystals at first the P33113−P11113 = −4.6·10 m/ N·V absolute coefficients difference of crossflow piezo-electrooptic e...
متن کاملSpeed Performance Degradation of Electrooptic Modulator Devices by Neutrons Irradiations at High temperature Effects
In the present paper, we have deeply investigated the transmission efficiency degradation of electrooptic modulator devices in thermal irradiated hard environments over wide range of the operating parameters. It is well known that the radiation-induced electrooptic modulator defects can modify the initial doping concentrations, creating generation-recombination centres and introducing trapping ...
متن کامل