Shear strengths of aluminium nitride and titanium diboride under plane shock wave compression
نویسندگان
چکیده
This work compares the estimates of shear strengths of aluminium nitride and titanium diboride obtained (a) from the simultaneous measurements of longitudinal and lateral stress by means of manganin gauges under plane shock wave loading with (b) those calculated from the offset between hydrodynamic and shock Hugoniot of these materials. The results of this work show that whereas the estimates of the shear strength obtained by these two methods for titanium diboride are consistent with one another, those of aluminium nitride are not. This is at least partly due to the observed inconsistency between the simultaneous measurements of longitudinal and lateral stresses in aluminium nitride.
منابع مشابه
Penetration Resistance of Armor Ceramics: Dimensional Analysis and Property
A new dimensionless relationship for analysis of ballistic penetration data is derived and applied to polycrystalline ceramic materials. Targets consist of ceramic tiles backed by thick metallic plates within which residual penetration depths have been reported in experimental studies. Particular ceramics analyzed here are lowand high-purity alumina, aluminum nitride, boron carbide, silicon car...
متن کاملTitanium Aluminium Nitride and Titanium Boride Multilayer Coatings Designed to Combat Tool Wear
The lifetimes and the premature wear of machining tools impact on manufacturing efficiencies and productivities. A significant proportion of machining tool damage can be attributed to component wear. Here, titanium aluminium nitride (TiAlN) multi-layered with titanium diboride (TiB2) prepared by PVD (Physical Vapour Deposition) sputtering onto H-13 substrates are studied as potential wear-resis...
متن کاملMicrostructure of spark plasma sintered TiB2 and TiB2–AlN ceramics
In this research study, the effects of aluminum nitride (AlN) additive on the densification behavior and microstructure development of titanium diboride (TiB2) based ceramic matrix composite were investigated. In this way, a monolithic TiB2 ceramic and a TiB2–5 wt% AlN ultrahigh temperature ceramic composite were fabricated by spark plasma sintering (SPS) proces...
متن کاملSubstructure Model for Concrete Behavior Simulation under Cyclic Multiaxial Loading
This paper proposes a framework for the constitutive model based on the semi-micromechanical aspects of plasticity, including damage progress for simulating behavior of concrete under multiaxial loading. This model is aimed to be used in plastic and fracture analysis of both regular and reinforced concrete structures, for the framework of sample plane crack approach. This model uses multilamina...
متن کاملNumerical Simulation of Shock-Wave/Boundary/Layer Interactions in a Hypersonic Compression Corner Flow
Numerical results are presented for the shock-boundary layer interactions in a hypersonic flow over a sharp leading edge compression corner. In this study, a second- order Godunov type scheme based on solving a Generalized Riemann Problem (GRP) at each cell interface is used to solve thin shear layer approximation of laminar Navier-Stokes (N-S) equations. The calculated flow-field shows general...
متن کامل