New Method for Rotor Temperature Estimation
نویسندگان
چکیده
Abstract: This paper presents a new method for observing the rotor temperature of high-power squirrel cage induction machines in measurable variables. The method is based on the fact that the rotor resistance depends on the actual rotor temperature. The main problem is to separate the changes in the rotor resistance due to temperature and skin effect. By comparing the input impedance with a known circle diagram measured in the start-up phase, it is possible to calculate changes in the rotor temperature. Further analyses also make it possible to obtain the absolute rotor temperature at any time.
منابع مشابه
Comparison of MRAS Based Rotor Resistance Estimator Using Reactive Power and Flux Based Techniques for Space Vector PWM Inverter Fed Induction Motor Drives
The performance of Vector Controlled Induction Motor drive depends on the accuracy of rotor resistance which will vary with temperature and frequency. The MRAS approach using reactive power and flux as a state variable for rotor resistance estimation makes MRAS computationally simpler and easy to design. In this paper, Rotor Flux based MRAS (RF-MRAS) and Reactive Power based MRAS (RP-MRAS) for ...
متن کاملEstimation of Temperature Rise in Stator Winding and Rotor Magnet of PMSM Based on EKF
Abstract—This paper proposed an estimation approach of temperature rise in stator winding and rotor magnet of a surfaced-mounted permanent magnet (PM) AC motor. By using the 3rd-order extended Kalman filter (EKF) algorithm in rotating reference frame, stator winding resistance and rotor PM flux-linkage can be estimated independently. After comparing the estimation results of resistance and flux...
متن کاملبهبود عملکرد درایو کنترل سرعت موتور القایی در محدوده ی سرعت های پایین و بالا با جبران ساز شار روتور
One of the most important control methods in induction motor is direct vector control. This method is based on rotor flux estimation using stator voltage. The machine voltage is low in The voltage model for low speed and voltage drop over the stator resistance is not negligible in front of stator voltage. Thus the stator flux estimation using voltage method is not precise. Some methods are base...
متن کاملA New Method for Estimation of Creep of Concrete Using Short-TermTests under Higher Temperature
In the Present study, attempt will be made to propose a new method for prediction of long-term essential creep of concrete utilizing some short-term creep tests under high temperature. To do so, regarding the similarities between essential creep of concrete and creep in viscoelastic materials, the time–temperature equivalence relation in viscoelastic materials is evaluated for concrete. This re...
متن کاملA Novel Algorithm for Rotor Speed Estimation of DFIGs Using Machine Active Power based MRAS Observer
This paper presents a new algorithm based on Model Reference Adaptive System (MRAS) and its stability analysis for sensorless control of Doubly-Fed Induction Generators (DFIGs). The reference and adjustable models of the suggested observer are based on the active power of the machine. A hysteresis block is used in the structure of the adaptation mechanism, and the stability analysis is performe...
متن کامل