Highly efficient inverted rapid-drying blade-coated organic solar cells
نویسندگان
چکیده
23 24 25 26 27 28 29 30 31 32 Article history: Received 27 September 2011 Received in revised form 27 November 2011 Accepted 31 December 2011 Available online xxxx
منابع مشابه
Morphological control and performance improvement of organic photovoltaic layer of roll-to-roll coated polymer solar cells
We systematically investigated the thermal effects of drying process as well as thermal annealing on morphology and performance of inverted polymer solar cells (PSCs) fabricated by roll-to-roll (R2R) slotdie coating. Power conversion efficiency (PCE) of PSCs layer is strongly influenced by bulk heterojunction (BHJ) active layer. Compared to the conventional annealing process, we demonstrate tha...
متن کاملHigh performance organic photovoltaic cells with blade-coated active layers
High performance bulk heterojunction organic photovoltaic (OPV) cells with blade-coated active layers of POD2T-DTBT blended with [6,6]-phenyl-C71-butyric acid methyl ester (PC71BM) are demonstrated in this work. The blade-coated cells exhibit power conversion efficiencies of up to 6.74%, which is comparable to those of conventional spincoated cells but obtained with just a fraction of the mater...
متن کاملPolymer solar cell by blade coating
Polymer bulk hetero-junction solar cells of poly(3-hexylthiophene) (P3HT) donor and (6,6)-phenyl-C61-butyric acid methyl ester (PCBM) acceptor are fabricated by blade coating in toluene solution. Desired donor–acceptor self-organization is achieved without the slow drying process and high boiling point solvent. Power conversion efficiency is 3.8%, much higher than the 2.6% obtained by spin coat...
متن کاملMoO3 Thickness, Thermal Annealing and Solvent Annealing Effects on Inverted and Direct Polymer Photovoltaic Solar Cells
Several parameters of the fabrication process of inverted polymer bulk heterojunction solar cells based on titanium oxide as an electron selective layer and molybdenum oxide as a hole selective layer were tested in order to achieve efficient organic photovoltaic solar cells. Thermal annealing treatment is a common process to achieve optimum morphology, but it proved to be damageable for the per...
متن کاملبهبود چگالی جریان و افزایش کارایی سلول خورشیدی پلیمری P3HT:PCBM با استفاده از نانومیله اکسید روی
Hybrid solar cells combine organic and inorganic materials with the aim of utilizing the low cost cell production of organic photovoltaics (OPV) as well as obtaining other advantages, such as tuneable absorption spectra, from the inorganic component. Whilst hybrid solar cells have the potential to achieve high power conversion efficiencies (PCE), currently obtained efficiencies are quite low. T...
متن کامل