A first damage modelling of SiC-SiC laminates under dynamic loading
نویسندگان
چکیده
A first mesomodelling, which allows us to describe the mechanical behaviour of an elementary ply within a SiC-SiC laminate under dynamic loading, is proposed. Questions related to its identification and its use for the prédiction of the dynamic fracture of laminated structures are discussed.
منابع مشابه
Fatigue Damage and Lifetime of SiC/SiC Ceramic-Matrix Composite under Cyclic Loading at Elevated Temperatures
In this paper, the fatigue damage and lifetime of 2D SiC/SiC ceramic-matrix composites (CMCs) under cyclic fatigue loading at 750, 1000, 1100, 1200 and 1300 °C in air and in steam atmosphere have been investigated. The damage evolution versus applied cycles of 2D SiC/SiC composites were analyzed using fatigue hysteresis dissipated energy, fatigue hysteresis modulus, fatigue peak strain and inte...
متن کاملComparisons of Damage Evolution between 2D C/SiC and SiC/SiC Ceramic-Matrix Composites under Tension-Tension Cyclic Fatigue Loading at Room and Elevated Temperatures
In this paper, comparisons of damage evolution between 2D C/SiC and SiC/SiC ceramic-matrix composites (CMCs) under tension-tension cyclic fatigue loading at room and elevated temperatures have been investigated. Fatigue hysteresis loops models considering multiple matrix cracking modes in 2D CMCs have been developed based on the damage mechanism of fiber sliding relative to the matrix in the in...
متن کاملExperimental characterisation of damage in SiC/SiC minicomposites
SiC/SiC composites are studied for their potential use in the next generation of nuclear reactors. A multiscale approach is under development to construct a predictive modelling of their complex damageable mechanical behaviour due to their heterogeneous microstructure. This paper focuses on the damage characterisation of the composite at the scale of the tow at room temperature, both in terms o...
متن کاملDamage production and accumulation in SiC structures in inertial and magnetic fusion systems
0022-3115/$ see front matter 2010 Elsevier B.V. A doi:10.1016/j.jnucmat.2010.12.077 ⇑ Corresponding author. Tel.: +1 608 263 5093; fax E-mail address: [email protected] (M.E. Sawan Radiation damage parameters in SiC/SiC composite structures are determined in both magnetic (MFE) and inertial (IFE) confinement fusion systems. Variations in the geometry, neutron energy spectrum, and pulsed natur...
متن کاملFinite element method modelling of the properties of a Cu–SiC composite under cyclic loading conditions
The paper reports on finite element method (FEM) analysis of Cu–SiC composites behaviour under cyclic loading conditions. In order to emphasise the influence of materials description on following results, there were two hardening rules used to describe the plastic behaviour of the matrix: (a) simple isotropic and (b) combined isotropic-kinematic. Reinforcing ceramics was assumed to be perfectly...
متن کامل