Cad/cam Y-tzp–based Restorations
نویسنده
چکیده
Tel: 504-619-8607 Fax: 504-619-8741 E-mail: [email protected] Prospective clinical studies are evaluating the long-term success of Y-TZP–based all-ceramic FPDs. Y-TZP–based infrastructures for crowns and FPDs present favorable physical, mechanical, and optical properties. Some Y-TZP–based restorative systems use CAD/CAM technology. Nevertheless, technicians should be able to employ traditional concepts of infrastructure design for both crowns and FPDs when using such materials. The purpose of this article is to review the properties of Y-TZP–based materials as a restorative infrastructure and to review the application of traditional concepts of framework design with CAD/CAM technology.
منابع مشابه
Comparative study of flexural strength test methods on CAD/CAM Y-TZP dental ceramics
Clinically, fractures are the main cause of computer-aided design and computer-aided manufacturing (CAD/CAM) 3 mol%-yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) all-ceramic dental restorations failure because of repetitive occlusal loading. The goal of this work is to study the effect of test methods and specimen's size on the flexural strength of five ceramic products. Both bi-axi...
متن کاملThe Zirconia: a new dental ceramic material. An overview.
Yttrium tetragonal Zirconia polycrystals (Y-TZP) based systems are the more recent addition in to the high-strength all-ceramic systems that are used for crowns and fixed partial dentures. CAD/CAM produced Y-TZP based systems are being used and are said to be in demand in the aesthetic zone and in stress bearing regions as well. This systematic overview covers results of recent scientific studi...
متن کاملCurrent status of zirconia restoration.
During the past decade, zirconia-based ceramics have been successfully introduced into the clinic to fabricate fixed dental prostheses (FDPs), along with a dental computer-aided/computer-aided manufacturing (CAD/CAM) system. In this article (1) development of dental ceramics, (2) the current status of dental CAD/CAM systems, (3) CAD/CAM and zirconia restoration, (4) bond between zirconia and ve...
متن کاملThe relationship between milling a new silica-doped zirconia and its resistance to low-temperature degradation (LTD): a pilot study.
The aim of this study was to determine the machinability of new silica-doped Y-TZP by CAD/CAM and the resistance to low temperature degradation of the milled sample by comparing with a commercial HIP type Y-TZP material. The copings could be milled from silica-doped Y-TZP blocks without chipping, and there was no significant difference between the two types of Y-TZP materials in either the marg...
متن کاملReliability of metalloceramic and zirconia-based ceramic crowns.
Despite the increasing utilization of all-ceramic crown systems, their mechanical performance relative to that of metal ceramic restorations (MCR) has yet to be determined. This investigation tested the hypothesis that MCR present higher reliability over two Y-TZP all-ceramic crown systems under mouth-motion fatigue conditions. A CAD-based tooth preparation with the average dimensions of a mand...
متن کامل