On Structural Diagnosis for Interconnects
نویسندگان
چکیده
By means of new tools that can extract realistic faults from the PCB layout, generate test vectors and simulate fault diagnosis, we evaluated the applicability of structural diagnosis methods for interconnect faults. The results show that, compared to the traditional be-havioural approaches, structural diagnosis can reduce ambiguity in diagnosis and more compact test sets can be employed.
منابع مشابه
Time Domain Analysis of Graphene Nanoribbon Interconnects Based on Transmission Line Model
Time domain analysis of multilayer graphene nanoribbon (MLGNR) interconnects, based on transmission line modeling (TLM) using a six-order linear parametric expression, has been presented for the first time. We have studied the effects of interconnect geometry along with its contact resistance on its step response and Nyquist stability. It is shown that by increasing interconnects dimensions...
متن کاملTaguchi Approach and Response Surface Analysis for Design of a High-performance Single-walled Carbon Nanotube Bundle Interconnects in a Full Adder
In this study, it was attempted to design a high-performance single-walled carbon nanotube (SWCNT) bundle interconnects in a full adder. For this purpose, the circuit performance was investigated using simulation in HSPICE software and considering the technology of 32-nm. Next, the effects of geometric parameters including the diameter of a nanotube, distance between nanotubes in a bundle, and ...
متن کاملElectrophoretic deposition of MnCr2O4 coating for solid oxide fuel cell metallic interconnects
In the present study, Mn - Cr spinel powder was synthesized through a solid state reaction. In the next step, the electrophoretic deposition (EPD) method was used to apply the MnCr2O4 spinel, as an oxidation-resistant layer, on SUS 430 stainless steel in a potential of 300 V/cm. The coated and uncoated samples were then pre-sintered in air at 900 °C for 3 h followed by cyclic oxidation at 800 °...
متن کاملCopper Manganese Spinel Coating on a Ferritic Stainless Steel for SOFC Application
Nowadays, Because of daily reduction of fossil fuels and environmental problems caused by using them, Fuel Cells attracted a major attention as clean and efficient way of generating electrical power. Solid Oxide Fuel Cells (SOFCs) have many advantages to other fuel cell types. High working temperature of SOFCs caused serious challenges including high oxidation rate of interconnects, Spallation ...
متن کاملAt-Speed Wiring Interconnects Testing on COMBO6 card
In the paper an approach for at-speed board-level interconnection faults diagnosis of Combo6 card is presented. Existing methods and their limitations are briefly discussed first. Then, one-step diagnosis method for diagnosis of Combo6 wiring interconnects is presented. The method is based on utilization of ”Universal Test Set” [3]. Designed method allows identification of static faults (with f...
متن کامل