Investigations of Electrostatic and Ionized Fields Analysis for Dual-Electrode System
نویسندگان
چکیده
The paper presents the computation and measurement of electric field, in both electrostatic as well as ionized case, for dual electrode system intended for electrostatic applications. The dual electrode system consists of an ionizing and non-ionizing electrode have the same voltage and facing a grounded collecting plate. The charge simulation method (CSM) coupled with genetic algorithms (GAs) and method of characteristic (MOC) is applied to compute the electrostatic field and the ionized field respectively. The influence of dual system parameters such as ionized wire diameter and inter electrode distances on the profile of the electrostatic field on the collecting plate and on the surface of the ionizing wire has been studied. The measurements of the ionized electric field, current-voltage characteristics and ion current density profiles are implemented using the technique of the linear biased probe. An experimental setup is constructed to model the present electrode arrangement. The measurements are carried out for ionized wire of diameter 0.25 and 0.5mm. The computed results are found to be in good agreement with experiments.
منابع مشابه
An Equivalent Electrode System for Efficient Charging of Filtration Media
This paper concerns the influence of moving an auxiliary limiting cylinder in X-Y directions on the electrostatic field and corona onset voltage of the dual electrode system employed in the electrostatic filtration process resulting in a “Tri-electrode” system. The Tri-electrode system is applied in order to control the field around the ionized wire and on the ground plate. Accurate calculation...
متن کاملNonlinear static and dynamic behaviors of a microresonator under discontinuous electrostatic actuation
This article studied static deflection, natural frequency and nonlinear vibration of a clamped-clamped microbeam under discontinues electrostatic actuation. The electrostatic actuation was induced by applying AC-DC voltage between the microbeam and electrode plate. In contrast to previous works, it was assumed that length of the electrode plate was smaller than that of the microbeam. In additio...
متن کاملConstruction of S?-Selective Electrode and Thermodynamic Study of the Ternary Aqueous Mixed Electrolyte System (SrCl2, KG, H20) Using Potentiometric Method
In order to preparing strontium ion selective electrode 6-(4- nitropheny1)-2-pheny14, 4- dipropy1-3, 5-diaza-bicyclo [3, 1, 0] hex-2-ene (NPDBH) was used as an ionophore. This electrode responds to Sr (II)ion with a sensitivity of 28.2 ± 0.5 mV/decade over the range 1.0 x 10-6 to 1.0 Mat pH 3.0-10.0. Thelimit of detection was 2.4 x 10-7 M. The influences of membrane composition, the pH of the t...
متن کاملStudy and optimization of the necessary conditions for the sensitive determination of the lead ion by a modified carbon paste electrode in environmental water samples
Rapid and facile preparation of the cheap modified electrode materials is an important parameter in development of the efficient electrochemical sensor for industrial scale production and mass-market usage. In the present work, the carbon paste electrode modified with multi-walled carbon nanotubes (MWCNTs) was prepared for sensitive determination of lead (Pb) ion in the presence of bismuth (Bi)...
متن کاملStudy and optimization of the necessary conditions for the sensitive determination of the lead ion by a modified carbon paste electrode in environmental water samples
Rapid and facile preparation of the cheap modified electrode materials is an important parameter in development of the efficient electrochemical sensor for industrial scale production and mass-market usage. In the present work, the carbon paste electrode modified with multi-walled carbon nanotubes (MWCNTs) was prepared for sensitive determination of lead (Pb) ion in the presence of bismuth (Bi)...
متن کامل