An application to transient current signal based induction motor fault diagnosis of Fourier-Bessel expansion and simplified fuzzy ARTMAP
نویسندگان
چکیده
The start-up transient signals have been widely used for fault diagnosis of induction motor because they can reveal early defects in the development process, which are not easily detected with the signals in the steady state operation. However, transient signals are non-linear and contain multi components which need a suitable technique to process and identify the fault pattern. In this paper, the fault diagnosis problem of induction motor is conducted by a data driven framework where the Fourier-Bessel (FB) expansion is used as a tool to decompose transient current signal into series of single components. For each component, the statistical features in the time and the frequency domains are extracted to represent the characteristics of motor condition. The high dimensionality of the feature set is solved by generalized discriminant analysis (GDA) implementation to decrease the computational complexity of classification. In the meantime, with the aid of GDA, the separation of the feature clusters is increased, which enables the more classification accuracy to be achieved. Finally, the reduced dimensional features are used for classifier to perform the fault diagnosis results. The classifier used in this framework is the simplified fuzzy ARTMAP (SFAM) which belongs to a special class of neural networks (NNs) and provides a lower training time in comparison to other traditional NNs. The proposed framework is validated with transient current signals from an induction motor under different conditions including bowed rotor, broken rotor bar, eccentricity, faulty bearing, mass unbalance and phase unbalance. Additionally, this paper provides the comparative performance of (i) SFAM and support vector machine (SVM), (ii) SVM in the framework and SVM combined with wavelet transform in previous studies, (iii) the use of FB decomposition and Hilbert transform decomposition. The results show that the proposed diagnosis framework is capable of significantly improving the classification accuracy.
منابع مشابه
A Review of Application of Signal Processing Techniques for Fault Diagnosis of Induction Motors – Part I
Abstract - Use of efficient signal processing tools (SPTs) to extract proper indices for fault detection in induction motors (IMs) is the essential part of any fault recognition procedure. The Part1 of the two parts paper focuses on Fourier-based techniques including fast Fourier transform and short time Fourier transform. In this paper, all utilized SPTs which have been employed for fault fete...
متن کاملApplication of Signal Processing Tools for Fault Diagnosis in Induction Motors-A Review-Part II
The use of efficient signal processing tools (SPTs) to extract proper indices for the fault detection in induction motors (IMs) is the essential part of any fault recognition procedure. The 2nd part of this two-part paper is, in turn, divided into two parts. Part two covers the signal processing techniques which can be applied to non-stationary conditions. In this paper, all utilized SPTs for n...
متن کاملApplication of Fuzzy Controller for Automatic Diagnosis of Rotor Broken Bars in Industrial Induction Motors
This paper presents an online trained Fuzzy logic system based on FPGA to fault detection of broken rotor bar for squirrel cage induction motor. Fuzzy logic approach may help to diagnose induction motor faults in remote site and transmit fault diagnosis (via GSM\GPRS cellular network technology) to maintenance office or a programmed cell phone. The motor current signal is analyzed through the F...
متن کاملStator Turn-to-Turn Fault Detection of Induction Motor by Non-Invasive Method Using Generalized Regression Neural Network
Condition monitoring and protection methods based on the analysis of the machine's current are widely used according to non-invasive characteristics of current transformers. It should be noted that, these sensors are installed by default in the machine control center. On the other hand, condition monitoring based on mathematical methods has been proposed in literature. However, they are model b...
متن کاملFUZZY BASED FAULT DETECTION AND CONTROL FOR 6/4 SWITCHED RELUCTANCE MOTOR
Prompt detection and diagnosis of faults in industrial systems areessential to minimize the production losses, increase the safety of the operatorand the equipment. Several techniques are available in the literature to achievethese objectives. This paper presents fuzzy based control and fault detection for a6/4 switched reluctance motor. The fuzzy logic control performs like a classicalproporti...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Expert Syst. Appl.
دوره 40 شماره
صفحات -
تاریخ انتشار 2013