Prototype Hardware for Finite Element Modelling
نویسندگان
چکیده
Dept. of Electrical Engineering, The University of Lampung, Gedung H FT, Jalan Prof. Sumantri Brojonegoro No. 1, Bandar Lampung, 35145, Indonesia, Tel. (62) 0721 701609 Ext.219, Fax. (62) 0721 704947, [email protected] 2 Department of Mathematics, UMIST, PO Box 88, Sackville St., Manchester, M60 1QD, UK Tel. (44) 0161 200 8978, Fax. (44) 161 200 3669, [email protected] 3 Department of Electrical Engineering & Electronics, UMIST, PO Box 88, Sackville St., Manchester M60 1QD, UK Tel. (44) 0161 200 4729, Fax. (44) 0161 200 4789, [email protected]
منابع مشابه
Development of Linear Vernier Hybrid Permanent Magnet Machine for Wave Energy Converter
Today, due to the limited supply and rapid consumption of fossil fuels, transitioning towards renewable energy supplies has become more important than ever.. The purpose of this paper is to present a new linear permanent magnet vernier machine structure which is designed to capture wave energy and improve the performance of the prototype vernier machine. By halving the proposed vernier machine,...
متن کاملEvaluation of Fracture Parameters by Coupling the Edge-Based Smoothed Finite Element Method and the Scaled Boundary Finite Element Method
This paper presents a technique to evaluate the fracture parameters by combining the edge based smoothed finite element method (ESFEM) and the scaled boundary finite element method (SBFEM). A semi-analytical solution is sought in the region close to the vicinity of the crack tip using the SBFEM, whilst, the ESFEM is used for the rest of the domain. As both methods satisfy the partition of unity...
متن کاملModelling and Numerical Simulation of Cutting Stress in End Milling of Titanium Alloy using Carbide Coated Tool
Based on the cutting force theory, the cutting stress in end milling operation was predicted satisfactorily through simulation of using finite element method. The mechanistic force models were introduced in high accuracy force predictions for most applications. The material properties in the simulations were defined based on the cutting force theory, as a function of strain and strain rate wher...
متن کاملWave Motion and Stop-Bands in Pipes with Helical Characteristics Using Wave Finite Element Analysis
Pipes are widely used in many industrial and mechanical applications and devices. Although there are many different constructions according to the specific application and device, these can show helical pattern, such as spiral pipes, wire-reinforced pipes/shells, spring-suspension, and so on. Theoretical modelling of wave propagation provides a prediction about the dynamic behavior, and it is f...
متن کاملNovel Axial Flux Brushless Resolver Analysis and Optimization Using 3D Finite Element and d-q Model Method
Resolvers are widely used in electric driven systems especially in high precision servomechanisms. Both encapsulated and pancake resolvers suffer from a major drawback: static eccentricity (SE). This drawback causes a significant increase in resolver output position error (RPE) which could not be corrected electronically. To reduce RPE, this paper proposes a novel structure with axial flux. Pr...
متن کامل