Saving Energy and Time in Drying of Laundry: Molecular Mechanisms to Decrease the Residual Water Content of Fabric at the End of the Washing Cycle
نویسندگان
چکیده
Saving of energy and time in drying of laundry directly depends upon the residual water content of the fabric at the end of the spinning cycle. If the amount of water left in the fabric is significantly reduced then the time and energy required to dry the fabric is less. Both these factors benefit the consumer and the national energy consumption. For the USA alone, the 30 % reduction in the residual water content of the laundry is equivalent of saving of 900 million dollars in the energy cost in addition to the saving of time for the consumer.
منابع مشابه
Heat and Mass Transfer in Leather Drying Process
Leather manufacturing involves a crucial energy-intensive drying stage in the finishing process to remove its residual moisture. Determining drying characteristics of leather is vitally important so as to optimize the drying stage. This paper describes an analytical way for determination of the drying characteristics of leather. The model presented, is based on fundamental heat and mass tra...
متن کاملImportance of dynamic surface tension to the residual water content of fabrics.
At the end of the final spin cycle of the laundry process, the residual moisture content (RMC) of fabric is directly related to the dynamic surface tension of the residual water in the fabric. The LaPlace equation for capillary rise predicts that the capillary rise of solutions in a capillary is proportional to the surface tension at the air-liquid interface. If fabric can be considered to be a...
متن کاملWater-saving irrigation strategies affect tuber water relations and nitrogen content of potatoes
The dynamic and static deficit (DDI, SDI), partial root drying (DPRD, SPRD) and full (FI)irrigation strategies were applied in Agria and Ramos potato cultivars in a semi-arid area. FIreceived 100% of the potential evapotranspiration (ET); SDI and SPRD received 75% of ETduring the growth period; DDI and DPRD received 90% of ET in the first third, 75% of ET inthe second third and 50% of ET in the...
متن کاملImprovement of Efficiency of Coal-Fired Steam Power Plant by Reducing Heat Rejection Temperature at Condenser Using Kalina Cycle
This paper proposes an approach for improving the plant efficiency by reducing the heat rejection temperature of power cycle using Kalina Cycle System 11 (KCS11) which is integrated at the steam condenser of a 500 MWe SubC (subcritical) coal-fired power plant. It is modelled by using power plant simulation software ‘Cycle Tempo’ at different plant operating conditions. Results show t...
متن کاملDevelopment and Simulation of a PEM Fuel Cell model for Prediction of Water Content and Power Generation
The proton exchange membrane (PEMFC) fuel cell represents the energy of the future, in parallel with hydrogen. However, this technology must meet many technical challenges related to performance and durability before being sold on a large scale. It is well known that these challenges are closely linked to water management. This paper develops and implements a model of PEM fuel for simulation to...
متن کامل