Interface-capturing Finite-element Technique (icfet) for Transient Two-phase Flow
نویسنده
چکیده
A numerical model is presented for computation of unsteady two-fluid interfaces in nonlinear porous media flow. The nonlinear Forchheimer equation is included in the Navier-Stokes equations for porous media flow. The model is based on capturing the interface on a fixed mesh domain. The zero level set of a pseudo-concentration function, which defines the interface between the two fluids, is governed by a time-dependent advection equation. The time-dependent Navier-Stokes equations and the advection equation are spatially discretized by the finite element (FE) method. The fully coupled implicit time integration scheme and the explicit forward Eulerian scheme are implemented for the advancement in time. The trapezoidal rule is applied to the fully implicit scheme, while the operator-splitting algorithm is used for the velocity-pressure segregation in the explicit scheme. The spatial and time discretizations are stabilized using FE stabilization techniques. Numerical examples of unsteady flow of two-fluid interfaces in an earth dam are investigated.
منابع مشابه
A Hybridized Crouziex-Raviart Nonconforming Finite Element and Discontinuous Galerkin Method for a Two-Phase Flow in the Porous Media
In this study, we present a numerical solution for the two-phase incompressible flow in the porous media under isothermal condition using a hybrid of the linear lower-order nonconforming finite element and the interior penalty discontinuous Galerkin (DG) method. This hybridization is developed for the first time in the two-phase modeling and considered as the main novelty of this research.The p...
متن کاملA preconditioned solver for sharp resolution of multiphase flows at all Mach numbers
A preconditioned five-equation two-phase model coupled with an interface sharpening technique is introduced for simulation of a wide range of multiphase flows with both high and low Mach regimes. Harten-Lax-van Leer-Contact (HLLC) Riemann solver is implemented for solving the discretized equations while tangent of hyperbola for interface capturing (THINC) interface sharpening method is applied ...
متن کاملDiagnosis of Different Types of Air-Gap Eccentricity Fault in Switched Reluctance Motors Using Transient Finite Element Method
This paper presents a method for diagnosis of eccentricity fault in a switched-reluctance motor (SRM) during offline and standstill modes. In this method, the fault signature is differential induced voltage (DIV) achieved by injecting diagnostic pulses to the motor windings. It will be demonstrated by means of results that there is a correlation between differential induced voltage and eccentri...
متن کاملNumerical Simulation of the Hydrodynamics of a Two-Dimensional Gas—Solid Fluidized Bed by New Finite Volume Based Finite Element Method
n this work, computational fluid dynamics of the flow behavior in a cold flow of fluidized bed is studied. An improved finite volume based finite element method has been introduced to solve the two-phase gas/solid flow hydrodynamic equations. This method uses a collocated grid, where all variables are located at the nodal points. The fluid dynamic model for gas/solid two-phase flow is based on ...
متن کاملFinite Element Methods for Fluid Dynamics with Moving Boundaries and Interfaces
We provide an overview of the finite element methods we developed in recent years for computation of fluid dynamics problems with moving boundaries and interfaces. This class of problems include those with free surfaces, two-fluid interfaces, fluid–object and fluid–structure interactions, and moving mechanical components. The methods developed can be classified into two main categories: interfa...
متن کامل