Graphene nanosheets as ink particles for inkjet printing on flexible board
نویسندگان
چکیده
Stable ink containing highly dispersed graphene nanosheets (GNSs) for inkjet printing on polyimide (PI) film has been successfully prepared by the adsorption of sodium n-dodecyl sulphate (SDS) and adjusting the pH value to 10 by ammonia. Conductive features on a flexible PI film were fabricated by inkjet printing the stable ink directly on a substrate. With higher number of printing cycles, the loading weight of GNS on PI film showed a linear increase up to printing 200 times, when the conductivity reached the saturation value of 6 S m . Sintering the printed GNS at 400 C can effectively lead to the elimination of excess SDS on the GNSs and increase the C@C content. The data provided by a four-point probe show that the conductivity of the sintered film can be improved to 121.95 S m . 2013 Elsevier B.V. All rights reserved.
منابع مشابه
Graphene-Based Conducting Inks for Direct Inkjet Printing of Flexible Conductive Patterns and Their Applications in Electric Circuits and Chemical Sensors
A series of inkjet printing processes have been studied using graphene-based inks. Under optimized conditions, using water-soluble single-layered graphene oxide (GO) and few-layered graphene oxide (FGO), various high image quality patterns could be printed on diverse flexible substrates, including paper, poly(ethylene terephthalate) (PET) and polyimide (PI), with a simple and low-cost inkjet pr...
متن کاملWater Fast of Inkjet Print by Using Acrylic /Nano-Silver Ink
A colour ink jet printing with improved water fastness property was produced by using of special component in the ink’s formulation. In this study, the water fastness of ink jet prints which used acrylic/nano-silver resin nano-composite ink instead of conventional resin in ink’s formulation was examined. The nano composite resin was prepared via miniemulsion polymerization of acrylate monomers ...
متن کاملInkjet-printed graphene electronics.
We demonstrate inkjet printing as a viable method for large-area fabrication of graphene devices. We produce a graphene-based ink by liquid phase exfoliation of graphite in N-methylpyrrolidone. We use it to print thin-film transistors, with mobilities up to ∼95 cm(2) V(-1) s(-1), as well as transparent and conductive patterns, with ∼80% transmittance and ∼30 kΩ/□ sheet resistance. This paves th...
متن کاملRapid and Versatile Photonic Annealing of Graphene Inks for Flexible Printed Electronics.
Intense pulsed light (IPL) annealing of graphene inks is demonstrated for rapid post-processing of inkjet-printed patterns on various substrates. A conductivity of ≈25,000 S m(-1) is achieved following a single printing pass using a concentrated ink containing 20 mg mL(-1) graphene, establishing this strategy as a practical and effective approach for the versatile and high-performance integrati...
متن کاملImproving Quality of Inkjet Printed Metal Nano-Particle Conductors
During the last couple of years several ink manufacturers have presented metal nano-particle inks for inkjet printing. These inks provide low resistances on plastic and paper substrates, thus enabling manufacturing of high-conductivity conductors that could be used in circuit boards. Inkjet printing of a commercial silver nano-particle ink on paper and plastic substrates has been investigated. ...
متن کامل