Preparation of Wood Plastic Composite with High Density Polyethylene and Bagasse
نویسندگان
چکیده
Abstrac: In this paper, the mechanical properties of high density polyethylene (HDPE grade 3840) produced by Bandare ImamIran, mixed with the wood and bagasse as fillers with 10-50 % w/w have been studied. The maximum tensile strength was observed at 10% w/w of fillers ratio. The elongation, impact strength and fracture energy were decreased with increasing of fillers ratio while the Young modulus and hardness were increased.
منابع مشابه
Investigation on mechanical properties of composite made of sawdust and high density polyethylene
In this research, the effect of wood species and particle size on mechanicalproperties of wood plastic composites (WPC) made of fir (Abies alba) and beech(Fagus orientalis L.) sawdust and high density polyethylene (HDPE) wereinvestigated. Wood plastic composite (WPC) were made with 30% HDPE in abatch process at 185˚C, at two particle sizes of 40 mesh and 80 mesh. Maleicanhydride polypropylene (...
متن کاملPreparation and properties of recycled HDPE/natural fiber composites
Composites based on recycled high density polyethylene (RHDPE) and natural fibers were made through melt blending and compression molding. The effects of the fibers (wood and bagasse) and coupling agent type/concentration on the composite properties were studied. The use of maleated polyethylene (MAPE), carboxylated polyethylene (CAPE), and titanium-derived mixture (TDM) improved the compatibil...
متن کاملDynamic Mechanical Analysis of Compatibilizer Effect on the Mechanical Properties of Wood Flour-High-Density Polyethylene Composites
In this study, effect of MAPE (maleic anhydride polyethylene) as the compatibilizer on the mechanical properties of wood-flour polyethylene composites has been investigated by using Dynamic Mechanical Analysis (DMA). Composites were made at 25% and 50% by weight fiber contents and 1% and 2% compatibilizer respectively. Controls were also made at the same fiber contents without the compatibilize...
متن کاملFiber reinforced plastic composites using recycled materials
This work investigates the feasibility of using recycled high density polyethylene (rHDPE), recycled polypropylene (rPP) and old newsprint fiber (ONP) to manufacture fiber reinforced composites. The boards were made through air-forming and hot press. The effects of the fiber loading and coupling agent content on tensile, flexural, internal bond properties and water absorption and thickness swel...
متن کاملCreep behavior of bagasse fiber reinforced polymer composites.
The creep behavior of bagasse-based composites with virgin and recycled polyvinyl chloride (B/PVC) and high density polyethylene (B/HDPE) as well as a commercial wood and HDPE composite decking material was investigated. The instantaneous deformation and creep rate of all composites at the same loading level increased at higher temperatures. At a constant load level, B/PVC composites had better...
متن کامل