Harmonic Suppression of Parallel Coupled-Line Bandpass Filters using Defected Microstrip Structure
نویسنده
چکیده
─ This paper presents a novel miniaturized parallel coupled-line bandpass filter by etching some slot resonators on the strip for suppressing the first spurious response. These slots perform a serious LC resonance property in certain frequency and suppress the spurious signals. By properly tuning these slot dimensions, multiple closed notches can be generated in the vicinity of spurious harmonic and a wide stopband can be obtained. Slot on the strip that is called Defected Microstrip Structure (DMS). The DMS interconnection disturbs the current distribution only across the strip, thereby giving a modified microstrip line with certain stop band and slow-wave characteristics. The simulation and measurement of a 4.7 GHz prototype bandpass filter are presented. The measured results show a satisfactory rejection level more than 30 dB at first spurious passband without affecting the passband response. Good agreement between the experimental and full-wave simulated results has been achieved. Index Terms ─ Defected Microstrip Structure (DMS), harmonic suppression, parallel coupled-line filter.
منابع مشابه
A Parallel-Coupled Microstrip Bandpass Filter with Hook Feed-Line for Wide Harmonics Rejection
In this decade, compact bandpass filters are essential components in microwave systems for passing desired signals and suppressing unwanted signals. Microstrip bandpass filter is rapidly going up in the design and fabrication in RF front-ends of wireless communication systems. The microstrip structure is well-known because of its light weight and simple design method. As knowing, the bandpass f...
متن کاملDesign of Coupled Resonators Bandpass Filter with Defected Ground Structure
In this paper a four-pole elliptic function bandpass filter is designed with two ground slots. A research of microstrip bandpass filters (BPF) using defected ground structures (DGS) is presented. DGS technique allows designs of tight couplings without the necessity of using very narrow coupling gaps. The simulator Sonnet is used to design the resonator and to calculate the coupling coefficient ...
متن کاملImprovement of Stopband Performance OF Microstrip Reconfigurable Band Pass Filter By Defected Ground Structure
A scheme for designing reconfigurable parallel-coupled-line bandpass filters using a SPDT MEMS switch, capable of operating at two different passband is presented. The spurious resonance of the filter has been removed by using defected ground structures to obtain better stopband performance. A proto-type filter with passband center frequency around 3.5 GHz and 5.0 GHz has been designed. The sim...
متن کاملKoch Fractal Shape Microstrip Bandpass Filters on High Resistivity Silicon for the Suppression of the 2 Harmonic
In this paper, the fractal shape is applied to microstrip band pass filters and integrated on a high-resistivity Si substrate to solve conventional 2 harmonic problem. Conventional microstrip coupled line filters are popular in RF front ends, because they can be easily fabricated and integrated with other RF components. However, they typically have large second harmonics that can cause unwanted...
متن کاملA Compact Ultra-Wideband Bandpass Filter with Sharp-Rejection using Complementary Split Ring Resonators
A compact and sharp-rejection ultra-wideband (UWB) microstrip band-pass filter (BPF) is developed using of left handed metamaterials realized by complementary split ring resonator (CSRR). Moreover, proposed structure consists of two doublets parallel coupling gaps at each side of a microstrip ring. In comparison with some other filters, this structure shows a significantly wider passband due to...
متن کامل