Fabrication of functional microstructured optical fibers through a selective-filling technique
نویسندگان
چکیده
We develop a method for the fabrication of functional microstructured optical fibers (MOFs) by selectively filling the air holes with liquid phase materials, where we utilize the dependence of filling speed on the size of the air holes. As a demonstration, we construct a hybrid MOF by filling the center hollow core of a triangular lattice photonic crystal fiber with dye-doped curable polymer, and experimentally observe the two-photon fluorescence from the hybrid MOF. © 2004 American Institute of Physics. [DOI: 10.1063/1.1828593]
منابع مشابه
Femtosecond laser-assisted selective infiltration of microstructured optical fibers.
A new method of selectively infiltrating microstructured optical fibers with the assistance of femtosecond laser micromachining is presented. With this technique, any type of air-holes in the cross-section of the microstructured optical fibers can be selectively infiltrated with liquids, which opens up a highly efficient, precise, flexible and reliable way of selective infiltrating and has high...
متن کاملRaman Spectra of a PMMA Microstructured Optical Fibre and Direct Measurement of Its Gain Coefficient
A polymethylmethacrylate (PMMA) microstructured polymer optical fiber (mPOF) is fabricated and characterized. Using the cut-back technique the fiber loss is measured which is higher than the step-index silica fibers. Through a novel experimental scheme, the backward Stokes spectrum of the fabricated mPOF is recorded over a range exceeding 3000 cm‑1 during the cut-back method and compared ...
متن کاملFabrication of selective injection microstructured optical fibers with a conventional fusion splicer.
A simple method for fabricating selective injection microstructured optical fibers (MOFs) using a conventional fusion splicer is described. The effects of fusion current, fusion duration and offset position on the hole collapse property of the MOFs are investigated. With this method, the central hollow-core and the holes in the cladding region can be selectively infiltrated, which allows for th...
متن کاملPhotonic Materials and Devices
Our recent advances in solid-state optoelectronic materials and devices will be reviewed. In the area of glass optics, fabrication of novel microstructured and multi-core fibers and their use in realizing single mode lasers will be summarized. In organic and plastic optics, photorefractive polymers for 3D display applications and nonlinear optical polymers for high speed modulators in RF photon...
متن کاملFabrication and study of microstructured optical fibers with elliptical holes.
We report the fabrication of what are believed to be the first microstructured optical fibers with uniformly oriented elliptical holes. A high degree of hole ellipticity is achieved with a simple technique that relies on hole deformation during fiber draw. Both form and stress-optic birefringence are characterized over a broad wavelength range. These measurements are in excellent agreement with...
متن کامل