Integrated Power Module for Appliance Motor Drives
نویسندگان
چکیده
These modules represent a sophisticated, integrated solution for 3 phase motor drives used in a variety of appliances, such as washing machines, energy efficient refrigerators and air conditioning compressor drives in the 250 Watt to 2 Kilowatt power range. They utilize NPT (non-punch through) IGBTs matched with Ultra-soft recovery diodes to minimize EMI generation. In addition to the IGBT power switches, the modules contain a 6 output monolithic driver chip, matched to the IGBTs to generate the most efficient power switch consistent with minimum noise generation and maximum ruggedness.
منابع مشابه
Comparison of MRAS Based Rotor Resistance Estimator Using Reactive Power and Flux Based Techniques for Space Vector PWM Inverter Fed Induction Motor Drives
The performance of Vector Controlled Induction Motor drive depends on the accuracy of rotor resistance which will vary with temperature and frequency. The MRAS approach using reactive power and flux as a state variable for rotor resistance estimation makes MRAS computationally simpler and easy to design. In this paper, Rotor Flux based MRAS (RF-MRAS) and Reactive Power based MRAS (RP-MRAS) for ...
متن کاملUsing Integrated Modules to Improve Efficiency, Reliability and Size of Home Appliance Motor Drives
متن کامل
A Digital Phase Locked Loop Speed Control of Three Phase Induction Motor Drive: Performances Analysis
This paper deals with performance analysis and implementation of a three phase inverter fed induction motor (IM) drive system. The closed loop control scheme of the drive utilizes the Digital Phase Locked Loop (DPLL). The DPLL is safely implemented all around the well known integrated circuit DPLL 4046. An experimental verification is carried out on one kw scalar controlled IM system drives for...
متن کاملApplication of Speed Estimation Techniques for Induction Motor Drives in Electric Traction Industries and vehicles
Induction motors are the most commonly used in the traction industries and electric vehicles, due to their low primary cost, low maintenance costs, and good performance. Speed identification is needed for the induction motor drives. However, using of speed sensors in the induction motor drives is associated with problems such as, extra cost, reduced reliability, added mounting space, etc.. Ther...
متن کاملParalleling of IGBTs and Diodes of One Power Module – Pushes Power Capability
The increasing request for motor drives with higher power levels is also driving the demand for power modules providing higher currents. The conventional approach to fulfill this requirement is to look for dedicated high current power modules. This article describes the alternative approach of paralleling IGBTs and diodes within one power module to extend its power capability, for example using...
متن کامل