The Impact of DC-power Layout on Stray Inductance of Bridge Arm in Power Converters
نویسندگان
چکیده
In high power converter design, low-inductance busbar connecting DC capacitors and power devices is the main concern to improve the quality of the whole power electronics system. There are several facts which affect the stray inductance of bridge arm. This paper mainly analyzes the influence of DC-power layout on the stray inductance taking a subway traction converter as example. The Psim9.0 software was used to calculate the stray inductance. The conclusion is that DC-power connection should be put different side from DC capacitance because lower stray inductance can be obtained than that of the same side. The simulation and experimental results are given to illustrate the effectiveness.
منابع مشابه
The Impact of Layer Number on Stray Inductance of DC-link Busbar in Power Converters
In high power converter design, low-inductance busbar connecting DC capacitors and power devices is the main concern to improve the quality of the whole power electronics system. This paper analyzes the impact of layernumber on the stray inductance of busbar taking a subway traction converter as example. The method of partial element equivalent circuit and the Q3D software are used to extract t...
متن کاملA Repetitive Control- based Approach for Power Sharing among Boost Converters in DC Microgrids
In this paper a repetitive control (RC) approach to improve current sharing between parallel-connected boost converters in DC microgrids is presented. The impact of changes in line impedance on current sharing is investigated. A repetitive controller is designed and connected in series with current controller of the boost converters to control the switching signals such that by regulating of th...
متن کاملA Novel Method for Modeling and Simulation of Asymmetrical Impedance-source Converters
Z-Source converter or impedance-source converter is a kind of power converters, which has the responsibility to convert the direct current to alternative current. This converter with respect to its circuit diagram acts as a buck-boost converter except it doesn’t use from DC-DC converter bridge. Γ-source inverters are one of the conventional converters based on impedance-sources; which have been...
متن کاملPassivity-Based Control of the DC-DC Buck Converters in High-Power Applications
In this paper, a novel approach for control of the DC-DC buck converter in high-power and low-voltage applications is proposed. Designed method is developed according to passivity based controller which is able to stabilize output voltage in a wide range of operation. It is clear that in high-power applications, parasitic elements of the converter may become comparable with load value and hence...
متن کاملاستفاده از اینورتر چندسطحی با کنترلکننده غیرخطی مستقیم برای اتصال مزرعه خورشیدی به شبکه
The solar photovoltaic (PV) farm delivers its harvested DC energy to the AC grid via power electronic interfaces. With insolation as well as ambient temperature variations, these power electronic converters should regulate operating point at optimal point to extracting maximum power from PV cells. In this paper, a direct nonlinear control method is developed for cascaded H-bridge multilevel inv...
متن کامل