Manz, H. and Loutzenhiser, P.G. and Frank, T. and Strachan, Paul and Bundi, R. and Maxwell, George (2006) Series of experiments for empirical validation of solar gain modelling in building energy simulation codes - Experimental setup, test cell characterization, specifications
نویسندگان
چکیده
Strathprints is designed to allow users to access the research output of the University of Strathclyde. Unless otherwise explicitly stated on the manuscript, Copyright © and Moral Rights for the papers on this site are retained by the individual authors and/or other copyright owners. Please check the manuscript for details of any other licences that may have been applied. You may not engage in further distribution of the material for any profitmaking activities or any commercial gain. You may freely distribute both the url (https://strathprints.strath.ac.uk/) and the content of this paper for research or private study, educational, or not-for-profit purposes without prior permission or charge.
منابع مشابه
Empirical validation of models to compute solar irradiance on inclined surfaces for building energy simulation
Accurately computing solar irradiance on external facades is a prerequisite for reliably predicting thermal behavior and cooling loads of buildings. Validation of radiation models and algorithms implemented in building energy simulation codes is an essential endeavor for evaluating solar gain models. Seven solar radiation models implemented in four building energy simulation codes were investig...
متن کاملSensitivity analysis and parameters calculation of PV solar panel based on empirical data and two-diode circuit model
In this paper, a simple algorithm based on a two-diode circuit model of the solar cell is proposed for calculating different parameters of PV panels. The input parameters required for this algorithm are available from datasheets of the standard PV modules. The values of series and parallel resistances, as well as the recombination factor of Diode 2, are estimated through an iterative solution p...
متن کاملValidation procedures for transient temperature, load and energy calculations in building simulation codes
The European Union directive on the energy performance of buildings (EPBD) requires calculation methodologies on energy performance and indoor climatic conditions. This paper gives an overview of the validation procedures developed within CEN (European Committee for Standardization) and ISO (International Standardization Organisation) for transient temperature, load and energy calculations. The...
متن کاملPerformance Study of a Solar Integrated Central Heating System of a Residential Building Using Trnsys- an Hourly Simulation Model (RESEARCH NOTE)
In this investigation, the performance of an existing heating system of a residential building incorporated with an array of solar thermal collectors was studied. For this purpose, transient systems simulation program model was assembled to estimate the hour-by-hour performance of the existing and the system equipped with the solar thermal collectors in terms of the provided space air condition...
متن کاملExtracting Technical Specifications of a Solar Panel Type to Design a 10 MW Hybrid Power Plant
This paper focuses on the design of a 10 MW hybrid power plant using the technical specifications (data sheet) of an industrial solar panel. The main purpose was to find out the exact electrical properties of the solar panel specialy with conjunction to its temperature, to optimize overall output energy. We first describe the most important types of solar power plants and afterwards focus on el...
متن کامل