Form birefringence in UV-exposed photosensitive fibers computed using a higher order finite element method.
نویسندگان
چکیده
The effective index change and form birefringence are calculated in UV-exposed fibers using a high-order vectorial finite element method. The birefringence is compared in optical fibers with and without photosensitive inner cladding.
منابع مشابه
UV-induced modification of stress distribution in optical fibers and its contribution to Bragg grating birefringence.
This paper discusses the importance of stress-induced contributions to the photo-induced birefringence observed in fiber Bragg gratings. Optical tomography measurements are performed in exposed and unexposed fibers to extract the stress profiles induced by UV-writing of fiber Bragg gratings for various exposure levels. A photoelastic analysis and a high-order isoparametric finite elements metho...
متن کاملModal Propagation Properties of Elliptical Core Optical Fibers Considering Stress-Optic Effects
The effect of thermally induced stress on the modal properties of highly elliptical core optical fibers is studied in this work using a finite element method. The stress analysis is carried out and anisotropic refractive index change is calculated using both the conventional plane strain approximation and the generalized plane strain approach. After considering the stress optical effect, the mo...
متن کاملOptical birefringence and polarization dependent loss of square- and rectangular-lattice holey fibers with elliptical air holes: numerical analysis.
Polarization dependent leakage loss as well as optical birefringence for the fundamental mode in square- and rectangular-lattice holey fibers with elliptical air holes are studied numerically based on the full-vector finite element method for the first time. It is shown that high birefringence in the order of 10-2 and large polarization dependent loss required for single-polarization single-mod...
متن کاملHigh birefringence photonic crystal fiber with a complex unit cell of asymmetric elliptical air hole cladding.
High birefringence induced by elliptical air hole photonic crystal fibers (EHPCFs) is analyzed numerically using the finite-element method. Statistical correlations between the birefringence and the various parameters are obtained. We found that the complex elliptical air hole is better than that of a circular one to obtain high birefringence in photonic crystal fibers. Our suggested structures...
متن کاملMixed finite element formulation enriched by Adomian method for vibration analysis of horizontally curved beams
Abstract: The vibration analysis of horizontally curved beams is generally led to higher order shape functions using direct finite element method, resulting in more time-consuming computation process. In this paper, the weak-form mixed finite element method was used to reduce the order of shape functions. The shape functions were first considered linear which did not provide adequate accuracy....
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Optics express
دوره 12 8 شماره
صفحات -
تاریخ انتشار 2004