EMC’04/Sendai MODELLING TECHNIQUES FOR THE ACCURATE SIMULATION OF INTERCONNECTS
نویسندگان
چکیده
The paper describes the hierarchy of models used in the modeling of interconnects in high-speed designs and focuses on the development of techniques needed for the high-frequency simulation of complete modules.
منابع مشابه
EMC’04/Sendai MODELLING TECHNIQUES FOR THE CALCULATION OF THE SHIELDING EFFECTIVENESS OF EQUIPMENT CABINETS
The paper describes recent advances in the modelling and simulation of materials and screens for the shielding and absorption of EM waves. Simple intermediate models are briefly outlined, followed by models for describing complex materials and screens in the time-domain.
متن کاملEMC’04/Sendai Magnetic Near-Field Distribution Measurements above a Patch Antenna using an Optical Waveguide Probe
We developed a magnetic field probe consisting of a LiNbO3 optical waveguide modulator and a loop antenna element for accurate magnetic near-field measurements in the gigahertz range. We confirmed the probe invasiveness by measuring magnetic field distributions above a patch antenna operating at 2.49 GHz using the probe. Then we compared those measured results with those for shielded loop probe...
متن کاملEMC’04/Sendai LIGHTNING STEPPED LEADER NUMERICAL SIMULATION
A lightning stepped leader model is developed. To predict the stepped leader is important to protect installations at ground against lightning. The numerical technique TLM (Transmission-line matrix) is applied.
متن کاملEMC’04/Sendai Three-wire Analysis Model to Predict SI and EMC Effects
Accurate driver and package models are necessary to analyze the signal integrity (SI) and electromagnetic compatibility (EMC) issues on digital circuits. 2-wire models that assume an ideal power distribution system (PDS) are commonly used in modeling the SI of signal lines. This assumption makes real SI and EMC analysis worthless or at least only useful under certain restrictions. In order to a...
متن کاملEMC’04/Sendai Control of Unintentional Electromagnetic Waves from Digital Circuits: Efficient EMC Modeling of Devices and PCBs
A research project has been carried out for the last five years, the subject of which is to develop effective methods to control electromagnetic noise radiation from digital electronic devices. Engineering approaches were chosen and some new modeling methods of electromagnetic phenomena around a printed circuit board are shortly described in relation to EMI subjects. Those results have been com...
متن کامل