A Closed-form Solution to Finite Bending of a Compressible Elastic-perfectly Plastic Rectangular Block*
نویسندگان
چکیده
The self-consistent Eulerian rate-type elastoplastic model based on the logarithmic rate is used to study finite bending of a compressible elastic-perfectly plastic rectangular block. It is found that an explicit closed-form solution for this typical inhomogeneous finite deformation mode may be available in a general case of compressible deformation with a stretch normal to the bending plane, where the maximum circumferential stretch at the outer surface serves as an independent parameter. Expressions are given for the bending angle, the bending moment, the outer and the inner radii, and the radii of the two moving elastic-plastic interfaces, etc. The exact stress distribution on any circumferential cross-section of the deformed block is accordingly determined. KeywordxFinite bending, closed-form solution, elasto-plastic model, finite deformation, compressible deformation, elastic-plastic interface
منابع مشابه
A Closed-form Semi-analytical Elastic-Plastic Solution for Predicting the Onset of Flange Wrinkling in Deep-drawing of a Two-layered Circular Plate
In this paper to predict the critical conditions for onset of elastic-plastic wrinkling of flange of a two-layered circular blank during the deep-drawing process a closed-form semi-analytical elastic-plastic solution using Tresca yield criterion alongwith deformation theory in plasticity with considernig the perfectly plastic behaviour of materials is presented. Simplifying the presented soluti...
متن کاملAnalytical bending solution of fully clamped orthotropic rectangular plates resting on elastic foundations by the finite integral transform method
This study presents exact bending solution of fully clamped orthotropic rectangular plates subjected to arbitrary loads resting on elastic foundations, based on the finite integral transform method. In this method, it is not necessary to determine the deformation function because the basic governing equations of the classical plate theory for orthotropic plates have been used. A detailed param...
متن کاملBending and Free Vibration Analyses of Rectangular Laminated Composite Plates Resting on Elastic Foundation Using a Refined Shear Deformation Theory
In this paper, a closed form solution for bending and free vibration analyses of simply supported rectangular laminated composite plates is presented. The static and free vibration behavior of symmetric and antisymmetric laminates is investigated using a refined first-order shear deformation theory. The Winkler–Pasternak two-parameter model is employed to express the interaction between the lam...
متن کاملExact 3-D Solution for Free Bending Vibration of Thick FG Plates and Homogeneous Plate Coated by a Single FG Layer on Elastic Foundations
This paper presents new exact 3-D (three-dimensional) elasticity closed-form solutions for out-of-plane free vibration of thick rectangular single layered FG (functionally graded) plates and thick rectangular homogeneous plate coated by a functionally graded layer with simply supported boundary conditions. It is assumed that the plate is on a Winkler-Pasternak elastic foundation and elasticity ...
متن کاملBending-Unbending Analysis of Anisotropic Sheet under Plane Strain Condition
The mechanical behavior of cold rolled sheets is significantly related to residual stresses that arise from bending and unbending processes. Measurement of residual stresses is mostly limited to surface measurement techniques. Experimental determination of stress variation through thickness is difficult and time-consuming. This paper presents a closed form solution for residual stresses, in whi...
متن کامل