Radial n-i-p structure SiNW-based microcrystalline silicon thin-film solar cells on flexible stainless steel
نویسندگان
چکیده
Radial n-i-p structure silicon nanowire (SiNW)-based microcrystalline silicon thin-film solar cells on stainless steel foil was fabricated by plasma-enhanced chemical vapor deposition. The SiNW solar cell displays very low optical reflectance (approximately 15% on average) over a broad range of wavelengths (400 to 1,100 nm). The initial SiNW-based microcrystalline (μc-Si:H) thin-film solar cell has an open-circuit voltage of 0.37 V, short-circuit current density of 13.36 mA/cm2, fill factor of 0.3, and conversion efficiency of 1.48%. After acid treatment, the performance of the modified SiNW-based μc-Si:H thin-film solar cell has been improved remarkably with an open-circuit voltage of 0.48 V, short-circuit current density of 13.42 mA/cm2, fill factor of 0.35, and conversion efficiency of 2.25%. The external quantum efficiency measurements show that the external quantum efficiency response of SiNW solar cells is improved greatly in the wavelength range of 630 to 900 nm compared to the corresponding planar film solar cells.
منابع مشابه
GROWTH OF THIN <p> μc-Si:H ON INTRINSIC a-Si:H FOR <nip> SOLAR CELLS APPLICATION
The μc-SiC:H / a-Si:H junction can be considered to be a sub-system of a n/i/p solar cell. Optimised performance of this junction can be assumed to be a key feature for obtaining high efficiency solar cells. In this paper the authors present results on the conductivity of boron doped microcrystalline hydrogenated silicon ( μc-Si:H) thin films deposited on amorphous substrates (e.g. g...
متن کاملReprint of Mrs 1996 Spring Meeting Symposium J Contamination Problems of Amorphous Silicon N-i-p Solar Cells on Metal Substrates
Commercial aluminium and stainless steel sheets were used as substrates for thin film silicon solar cell deposition. The influence of elemental contamination and disturbed film growth on solar cell performance and yield were studied. Diffusion during film growth was found to be more pronounced than thermally activated interdiffusion of existing films. Surface irregularities of the substrate are...
متن کاملFlexible Microcrystalline Silicon Solar Cells on Periodically Textured Plastic Substrates
Roll-to-roll processing of thin film solar cells on flexible low cost substrates is an attractive option to lower the production cost of photovoltaic modules. Plastic substrates like PET or PEN are insulating which potentially offers advantages compared to conducting steel foils. However, plastic substrates require lower processing temperatures and novel schemes for efficient light trapping. In...
متن کاملHeterogeneous growth of microcrystalline silicon germanium
Microcrystalline silicon germanium films showing excellent opto-electronic properties have been prepared at a substrate temperature of 1951C by radio frequency plasma enhanced chemical vapor deposition at 13.56MHz. A white light (AM 1.5) photoconductivity of 5 10 /O cm and ambipolar diffusion length of 114 nm (from SSPG) established the device quality. Films are intrinsic (Fermi level near midg...
متن کاملSimple Photovoltaic Device Based on Multiwall Carbon Nanotube/Silicon Heterojunction
Multiwall carbon nanotubes (MWCNTs) are grown via chemical vapour deposition method directly on a stainless steel substrate. Raman spectroscopy and transmission electron microscopy are the techniques chosen to characterize the structure of the synthesized carbon nanotubes: few structural defects are detected. After their removal from the stainless steel substrate, the as-grown MWCNTs are then a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره 7 شماره
صفحات -
تاریخ انتشار 2012