Kissing Bonds in Diffusion Bonded Parts
ثبت نشده
چکیده
The widespread application of diffusion bonding has been hindered, in part, by concems over kissing bonds. Kissing bonds are generally considered to be conditions where a bond has little or no strength and the concem is that such conditions might escape detection. At Rohr we differentiate between an intimate contact disbond (which has no bond between the surfaces but is detectable by careful ultrasonic testing) and a kissing bond (which also has no bond between the surfaces but is not detectable using current ultrasonic technology). These definitions will be used throughout.
منابع مشابه
Evaluation of kissing bond in composite adhesive lap joints using digital image correlation Preliminary studies
in the bonded region. Nevertheless, they may suffer due to the presence of defects in bond line and at the interface or due to improper curing process. While defects like voids, cracks and delaminations present in the adhesive bond line may be detected using different NDE methods, interfacial defects in the form of kissing bond may go undetected. Attempts using advanced ultrasonic methods like ...
متن کاملDetectability of kissing bonds using the non-linear high frequency transmission technique
Kissing bonds are adhesive bonding defects and are thought to arise from either contamination of the surfaces during manufacture or various forms of environmental attack. . When adhesives are used for safety critical applications the current method is to undertake extremely careful process control. None-the-less premature failure of adhesive joints still occurs and kissing bonds are often the m...
متن کاملEvaluation of Cu as an interlayer in Be/F82H diffusion bonds for ITER TBM
Copper has been investigated as a potential interlayer material for diffusion bonds between beryllium and Reduced Activation Ferritic/Martensitic (RAFM) steel. Utilizing Hot Isostatic Pressing (HIP), copper was directly bonded to a RAFM steel, F82H, at 650 C, 700 C, 750 C, 800 C and 850 C, under 103 MPa for 2 h. Interdiffusion across the bonded interface was limited to 1 lm or less, even at the...
متن کاملIonic Diffusion and Proton Transfer in Aqueous Solutions under an Electric Field: State-of-The-Art
Most of the properties and anomalies describing the behavior of water are somehow related to the hydrogen bonded (H-bonded) network [1-3]. Albeit the features of H-bonds have been investigated and depicted by an impressive amount of research, the way in which some external conditions–such as the inclusion of ionic species–affect the three-dimensional H-bonds arrangement is wrapped up in a high ...
متن کاملLow-distortion, high-strength bonding of thermoplastic microfluidic devices employing case-II diffusion-mediated permeant activation.
We demonstrate a new method for joining thermoplastic surfaces to produce microfluidic devices. The method takes advantage of the sharply defined permeation boundary of case-II diffusion to generate dimensionally controlled, activated bonding layers at the surfaces being joined. The technique is capable of producing bonds that exhibit cohesive failure, while preserving the fidelity of fine feat...
متن کامل