Electrodeposited lead dioxide coatings.
نویسندگان
چکیده
Lead dioxide coatings on inert substrates such as titanium and carbon now offer new opportunities for a material known for 150 years. It is now recognised that electrodeposition allows the preparation of stable coatings with different phase structures and a wide range of surface morphologies. In addition, substantial modification to the physical properties and catalytic activities of the coatings are possible through doping and the fabrication of nanostructured deposits or composites. In addition to applications as a cheap anode material in electrochemical technology, lead dioxide coatings provide unique possibilities for probing the dependence of catalytic activity on layer composition and structure (critical review, 256 references).
منابع مشابه
Corrosion behaviour of electrodeposited and sputtered Cr coatings and sputtered Ta coatings with α and β phases
The corrosion behaviour of αand β-Ta coatings was compared to that of Cr coatings produced by cylindrical magnetron sputtering as well as electrodeposition. For Ta coatings, the corrosion process was dominated by dissolution of the steel substrate through open pores, however, at the end of 5 days, coating degradation was not observed. In contrast, while open pores were not observed with the Cr ...
متن کاملBiomimetic and Electrodeposited Calcium-Phosphates Coatings on Ti - Formation, Surface Characterization, Biological Response
© 2012 Pisarek et al., licensee InTech. This is an open access chapter distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/3.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. Biomimetic and Electrodeposited Calcium-Phosphates Coatings on Ti – Formation, Surfa...
متن کاملSerdp Pollution Prevention Project Pp 1150 Electrodeposited Mn-sn-x Alloys for Corrosion Protection Coatings
متن کامل
Electrochemical preparation of chitosan/hydroxyapatite composite coatings on titanium substrates.
Composite coatings containing brushite (CaHPO(4). 2H(2)O) and chitosan were prepared by electrochemical deposition. The brushite/chitosan composites were converted to hydroxyapatite/chitosan composites in aqueous solutions of sodium hydroxide. The coatings ranged from approximately 1 to 15% chitosan by weight. Qualitative assessment of the coatings showed adhesion significantly improved over th...
متن کاملSynthesis and Performance Evaluation of Pulse Electrodeposited Ni-AlN Nanocomposite Coatings
This research work presents the microscopic analysis of pulse electrodeposited Ni-AlN nanocomposite coatings using SEM and AFM techniques and their performance evaluation (mechanical and electrochemical) by employing nanoindentation and electrochemical methods. The Ni-AlN nanocomposite coatings were developed by pulse electrodeposition. The nickel matrix was reinforced with various amounts of A...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Chemical Society reviews
دوره 40 7 شماره
صفحات -
تاریخ انتشار 2011