Current-voltage characteristics of organic materials similar to inorganic p-n homo-junction
نویسندگان
چکیده
We have evaluated the electric characteristics of an organic surfactant material, n-Cethyl-trimethyl-ammonium Bromide (C16TAB) to fabricate the p-n homo-junction. This C16TAB was dissolved in the pure water, where the potassium iodide (KI) was added. The impurities adaptation has been processed in this mixed solution with the application of voltage. The KI is ionized in the water and the potassium ion is moved to the negative electrode and the iodine ion to the positive electrode. We collected the solution in the vicinity of both electrodes separately, and dried it to fabricate the samples. We measured the resistivities of both samples which were in the range of 10+3 Ωcm. Both materials were contacted, and we measured the current-voltage (I-V) characteristics. We have obtained the I-V characteristics similar to a p-n homo-junction.
منابع مشابه
Piezo-phototronics effect on nano/microwire solar cells
Wurtzite structures, such as ZnO, GaN, InN and CdS, are piezoelectric semiconductor materials. A piezopotential is formed in the crystal by the piezoelectric charges created by applying a stress. The inner-crystal piezopotential can effectively tune/control the carrier separations and transport processes at the vicinity of a p–n junction or metal–semiconductor contact, which is called the piezo...
متن کاملA low switching voltage organic-on-inorganic heterojunction memory element utilizing a conductive polymer fuse on a doped silicon substrate
We present a simple, nonvolatile, write-once-read-many-times ~WORM! memory device utilizing an organic-on-inorganic heterojunction ~OI–HJ! diode with a conductive polymer fuse consisting of polyethylene dioxythiophene:polysterene sulfonic acid ~PEDOT:PSS! forming one side of the rectifying junction. Current transients are used to change the fuse from a conducting to a nonconducting state to rec...
متن کاملConductance of polymer nanowires fabricated by a combined electrodeposition and mechanical break junction method
We electrochemically deposit conducting polymer to bridge two closely placed electrodes, and then form a polymer nanowire by stretching the polymer bridge with the electrodes. During stretching, the conductance increases initially as the polymer chains are aligned in parallel, and then decreases in a stepwise fashion, due to abrupt changes in the nanowire thickness. We study the current– voltag...
متن کاملStudy of System Pressure Dependence on n-TiO2/p-Si Hetrostructure for Photovoltaic Applications
This study reports the fabrication of n-TiO2/p-Si hetrojunction by deposition of TiO2nanowires on p-Si substrate. The effect of system pressure and the current-voltage (I-V) characteristics of n-TiO2/p-si hetrojunction were studied. The morphology of the samples was investigated by Field Emission Scanning Electron Microscopy (FESEM) which confirms formation of T...
متن کاملInvestigation of 5,10,15,20-Tetrakis(3-,5--Di-Tert-Butylphenyl)Porphyrinatocopper(II) for Electronics Applications
In this work, an organic compound 5,10,15,20Tetrakis(3,5-di-tertbutylphenyl)porphyrinatocopper(II) (TDTBPPCu) is studied as an active material for thin film electronic devices. To investigate the electrical properties of TDTBPPCu, junction of TDTBPPCu with heavily doped n-Si and Al is fabricated. TDTBPPCu film was sandwiched between Al and n-Si electrodes. Various electrical parameters of TDTBP...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- IEICE Electronic Express
دوره 7 شماره
صفحات -
تاریخ انتشار 2010