Giant Persistent Photoconductivity of the WO3 Nanowires in Vacuum Condition
نویسندگان
چکیده
A giant persistent photoconductivity (PPC) phenomenon has been observed in vacuum condition based on a single WO3 nanowire and presents some interesting results in the experiments. With the decay time lasting for 1 × 10(4) s, no obvious current change can be found in vacuum, and a decreasing current can be only observed in air condition. When the WO3 nanowires were coated with 200 nm SiO2 layer, the photoresponse almost disappeared. And the high bias and high electric field effect could not reduce the current in vacuum condition. These results show that the photoconductivity of WO3 nanowires is mainly related to the oxygen adsorption and desorption, and the semiconductor photoconductivity properties are very weak. The giant PPC effect in vacuum condition was caused by the absence of oxygen molecular. And the thermal effect combining with oxygen re-adsorption can reduce the intensity of PPC.
منابع مشابه
Photoinduced oxygen release and persistent photoconductivity in ZnO nanowires
Photoconductivity is studied in individual ZnO nanowires. Under ultraviolet (UV) illumination, the induced photocurrents are observed to persist both in air and in vacuum. Their dependence on UV intensity in air is explained by means of photoinduced surface depletion depth decrease caused by oxygen desorption induced by photogenerated holes. The observed photoresponse is much greater in vacuum ...
متن کاملAnomalous quantum efficiency for photoconduction and its power dependence in metal oxide semiconductor nanowires.
The quantum efficiency and carrier lifetime that decide the photoconduction (PC) efficiencies in the metal oxide semiconductor nanowires (NWs) have been investigated. The experimental result surprisingly shows that the SnO2, TiO2, WO3, and ZnO NWs reveal extraordinary quantum efficiencies in common, which are over one to three orders of magnitude lower than the theoretical expectation. The surf...
متن کاملCobalt or Silver Doped WO3 Nanowires Deposited by a Two-Step AACVD for Gas Sensing Applications
A two-step procedure was implemented to obtain tungsten oxide nanowires (WO3) doped with cobalt or silver oxide nanoparticles from metal-organic precursors, W(CO)6, Co(acac)2 and Ag(acac)2. In the first step, nanowires were grown at 400 °C using an aerosol assisted chemical vapor deposition system (AA-CVD) and subsequently annealed at 500 °C for 2 h. In the second step, metal loading (at differ...
متن کاملSimultaneous Synthesis of WO3-x Quantum Dots and Bundle-Like Nanowires Using a One-Pot Template-Free Solvothermal Strategy and Their Versatile Applications.
Tungsten oxide (WO3-x ), a new alternative to conventional semiconductor material, has attracted numerous attentions owning to its widespread potential applications. Various methods have been reported for the synthesis of WO3-x nanostructures such as nanowires or nanodots. However, templates or surfactants are often required for the synthesis, which significantly complicate the process and hind...
متن کاملSeed growth of tungsten diselenide nanotubes from tungsten oxides.
We report growth of tungsten diselenide (WSe2) nanotubes by chemical vapor deposition with a two-zone furnace. WO3 nanowires were first grown by annealing tungsten thin films under argon ambient. WSe2 nanotubes were then grown at the tips of WO3 nanowires through selenization via two steps: (i) formation of tubular WSe2 structures on the outside of WO3 nanowires, resulting in core (WO3)-shell (...
متن کامل