Glucose effectiveness assessed under dynamic and steady state conditions. Comparability of uptake versus production components.

نویسندگان

  • M Ader
  • T C Ni
  • R N Bergman
چکیده

Glucose tolerance is determined by both insulin action and insulin-independent effects, or "glucose effectiveness," which includes glucose-mediated stimulation of glucose uptake (Rd) and suppression of hepatic glucose output (HGO). Despite its importance to tolerance, controversy surrounds accurate assessment of glucose effectiveness. Furthermore, the relative contributions of glucose's actions on Rd and HGO under steady state and dynamic conditions are unclear. We performed hyperglycemic clamps and intravenous glucose tolerance tests in eight normal dogs, and assessed glucose effectiveness by two independent methods. During clamps, glucose was raised to three successive 90-min hyperglycemic plateaus by variable labeled glucose infusion rate; glucose effectiveness (GE) was quantified as the slope of the dose-response relationship between steady state glucose and glucose infusion rate (GE[CLAMP(total)]), Rd (GE[CLAMP(uptake)]) or HGO (GE[CLAMP(HGO)]). During intravenous glucose tolerance tests, tritiated glucose (1.2 microCi/kg) was injected with cold glucose (0.3 g/kg); glucose and tracer dynamics were analyzed using a two-compartment model of glucose kinetics to obtain Rd and HGO components of glucose effectiveness. All experiments were performed during somatostatin inhibition of islet secretion, and basal insulin and glucagon replacement. During clamps, Rd rose from basal (2.54+/-0.20) to 3.95+/-0.54, 6.76+/-1.21, and 9.48+/-1.27 mg/min per kg during stepwise hyperglycemia; conversely, HGO declined to 2.06+/-0.17, 1.17+/-0.19, and 0.52+/-0.33 mg/min per kg. Clamp-based glucose effectiveness was 0.0451+/-0.0061, 0.0337+/-0.0060, and 0.0102+/-0.0009 dl/min per kg for GE[CLAMP(total)], GE[CLAMP(uptake)], and GE[CLAMP(HGO)], respectively. Glucose's action on Rd dominated overall glucose effectiveness (72.2+/-3.3% of total), a result virtually identical to that obtained during intravenous glucose tolerance tests (71.6+/-6.1% of total). Both methods yielded similar estimates of glucose effectiveness. These results provide strong support that glucose effectiveness can be reliably estimated, and that glucose-stimulated Rd is the dominant component during both steady state and dynamic conditions.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Influence of Operation Conditions Upon the Dynamic Steady State Performance of Switched Reluctance Motor

In order to obtain more accurate predicted dynamic steady-state performance with shorter computation time, an available mathematical model is modified and presented. Using this modified model, performance of a typical switched reluctance motor (SRM) under a wide range of variations of operating conditions is obtained and discussed. These include variations of speed, voltage, load and switching ...

متن کامل

Experimental Study and steady state stability analysis of CLL-T Series Parallel Resonant Converter with Fuzzy controller using State Space Analysis

This paper presents a Closed Loop CLL-T (capacitor inductor inductor) Series Parallel Resonant Converter (SPRC) has been simulated and the performance is analysised. A three element CLL-T SPRC working under load independent operation (voltage type and current type load) is presented in this paper. The Steady state Stability Analysis of CLL-T SPRC has been developed using State Space technique a...

متن کامل

Simulation and Control of a Methanol-To-Olefins (MTO) Laboratory Fixed-Bed Reactor

In this research, modeling, simulation, and control of a methanol-to-olefins laboratory fixed-bed reactor with electrical resistance furnace have been investigated in both steady-state and dynamic conditions. The reactor was modeled as a one-dimensional pseudo-homogeneous system. Then, the reactor was simulated at steady-state conditions and the effect of different parameters including...

متن کامل

Dynamic Simulation and Control of the Demethanizer Unit in Natural Gas Refining Plant

The NGL refinery of the Sirri Island has a major role in the production of high-value products. One of the most important refinery units is the demethanizer unit, comprising of a complex network of distillation towers and heat exchangers. In the first step, using the Aspen Hysys software, a proper steady state model was developed for this unit in which the simulation of the main equipment that ...

متن کامل

Steady-State and Dynamic Simulations of Gas Absorption Column Using MATLAB and SIMULINK

Separation is one of the most important process in all the chemical industries and the gas absorption is the simplest example of separation process which is generally used for the absorption of dilute components from a gaseous mixture. In the present work, a dynamic system of mathematical equation (algebraic and differential) is modeled to predict the behavior of the absorption column using mat...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • The Journal of clinical investigation

دوره 99 6  شماره 

صفحات  -

تاریخ انتشار 1997