Air-coupled Ultrasonic Testing of Materials
ثبت نشده
چکیده
منابع مشابه
Application of air – coupled ultrasonic technique for sizing of delamination type defect in multilayered materials
Ultrasonic testing using couplants is most popular technique for non destructive testing of solid materials. In the most non – destructive evaluation tasks such as investigation of materials whose properties may be changed by liquid contact this technique can not be used. Use of contact technique can be restricted for complex geometry structures. Also, liquid couplants cannot be used when mater...
متن کاملInvestigation of Accurate Imaging of the Defects in Composite Materials Using Ultrasonic Air-coupled Technique
The modern aircrafts are built using various composite materials such as carbon/glass fibre reinforced plastics, GLARE and honeycombs. Manufacturing technologies of composite materials are complicated and include many stages. Small deviations from the technology parameters may cause relatively small defects, but influence of these defects on a total strength of a construction may be essential. ...
متن کاملAir - Coupled Ultrasonic Ferroelectret Receiver with Additional DC Voltage †
Highly sensitive air-coupled ultrasonic sensors are essential for various applications such as testing of composite materials. One of the major challenges for the development of air-coupled ultrasonic sensors is the impedance matching to air. With a lower acoustic impedance than the usual piezoelectric materials, charged cellular polypropylene film (cPP) offers better matching to air with a sim...
متن کاملAir Coupled Ultrasonic Inspection of Steel Rubber Interface
This paper describes the investigation for the feasibility of inspection of steel-rocasin rubber specimen used in rocket motor for detection of debond by using air-coupled ultrasonic. A pair of high performance air-coupled transducers was used to generate and receive the high intensity ultrasonic pulses. Probes were placed at the opposite side of the specimen during inspection. It was shown tha...
متن کاملAnisotropic Materials Characterization Using Air-coupled Ultrasound
Ultrasonic materials characterization is widely used to assess both properties and defects of structural components. Recently, the option of gasor air-coupled ultrasonic testing has become a realistic possibility. In this paper we develop the application of resonant sound transmission methods through ambient air in anisotropic materials with the sound wavevector oriented in a general direction ...
متن کامل