A Unified Analysis of Transmission Conditions for Thin Conducting Sheets in the Time-Harmonic Eddy Current Model
نویسندگان
چکیده
Abstract. We introduce tools for a unified analysis and a comparison of impedance transmission conditions (ITCs) for thin conducting sheets within the time-harmonic eddy current model in two dimensions. The first criterion is the robustness with respect to the frequency or skin depth, that means if they give meaningful results for small and for large frequencies or conductivities. As a second tool we study the accuracy for a range of sheet thicknesses and frequencies for a relevant example, and analyse finally their asymptotic order in different asymptotic regimes. For the latter we write all the ITCs in a common form and show how they can be realised within the finite element method. Two new conditions which we call ITC-2-0 and ITC-2-1 are introduced in this article which appear in a symmetric form. They are derived by asymptotic expansions in the asymptotic regime of constant ratio between skin depth and thickness like those in [34]. We analyse these ITCs in comparison with the often used perfect electric boundary condition, the conditions by Levi-Civita [26, 36], the shielding element by Nakata et.al. [29], the thin layer impedance boundary conditions by Mayergoyz et.al. [42, 27] and a family of ITCs derived by asymptotic expansions in the asymptotic regime of constant shielding by Schmidt and Tordeux [37]. Our analysis shows the superiority of the transmission conditions derived by asymptotic expansions where especially the worst-case error level of the ITC-2-1 is remarkably lower than for all the other conditions.
منابع مشابه
High order transmission conditions for thin conductive sheets in magneto-quasistatics
We propose transmission conditions of order 1, 2 and 3 approximating the shielding behaviour of thin conducting curved sheets for the magneto-quasistatic eddy current model in 2D. This model reduction applies to sheets whose thicknesses ε are at the order of the skin depth or essentially smaller. The sheet has itself not to be resolved, only its midline is represented by an interface. The compu...
متن کاملEquivalent Transmission Conditions for the Time-Harmonic Maxwell Equations in 3D for a Medium with a Highly Conductive Thin Sheet
We propose equivalent transmission conditions of order 1 and 2 for thin and highly conducting sheets for the time-harmonic Maxwell’s equation in three dimension. The transmission conditions are derived asymptotically for vanishing sheet thickness ε where the skin depth is kept proportional to ε. The condition of order 1 turns out to be the perfect electric conductor boundary condition. The cond...
متن کاملImproving the performance of UPQC under unbalanced and distortional load conditions: A new control method
This paper presents a new control method for a three-phase four-wire Unified Power Quality Conditioner (UPQC) to deal with the problems of power quality under distortional and unbalanced load conditions. The proposed control approach is the combination of instantaneous power theory and Synchronous Reference Frame (SRF) theory which is optimized by using a self-tuning filter (STF) and without us...
متن کاملDesignation of an Indicator for flashover prediction of porcelain and glass insulators based on experimental tests.
Flashover of polluted insulators in contaminated areas is one of the most important factors influencing the operation of transmission and distribution lines and finally line outages. Therefore, it is essential to prevent and detect flashover in the insulators. Hence, utilizing the insulator status monitoring systems and predicting their functions have absorbed a lot of attention over the recent...
متن کاملA new approach for nonlinear vibration analysis of thin and moderately thick rectangular plates under inplane compressive load
In this study, a hybrid method is proposed to investigate the nonlinear vibrations of pre- and post-buckled rectangular plates for the first time. This is an answer to an existing need to develope a fast and precise numerical model which can handle the nonlinear vibrations of buckled plates under different boundary conditions and plate shapes. The method uses the differential quadrature element...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- SIAM Journal of Applied Mathematics
دوره 73 شماره
صفحات -
تاریخ انتشار 2013