Ahmed Elserougi paper
نویسندگان
چکیده
The Inter feeder Power Flow Regulator (IFPFR) proposed in this paper consists of several voltage source inverters with common dc bus; each inverter is connected in series with one of different independent distribution feeders in the power system. This paper is concerned with how to transfer power between the feeders for load sharing purpose. The power controller of each inverter injects the power (for sending feeder) or absorbs the power (for receiving feeder) via injecting suitable voltage; this voltage injection is simulated by voltage drop across series virtual impedance, the impedance value is selected to achieve the concept of power exchange between the feeders without perturbing the load voltage magnitude of each feeder. In this paper a new control scheme for load sharing using IFPFR is proposed. Keywords—IFPFR, Load sharing, Power transfer
منابع مشابه
Investigation of Inter Feeder Power Flow Regulator: Load Sharing Mode
The Inter feeder Power Flow Regulator (IFPFR) proposed in this paper consists of several voltage source inverters with common dc bus; each inverter is connected in series with one of different independent distribution feeders in the power system. This paper is concerned with how to transfer power between the feeders for load sharing purpose. The power controller of each inverter injects the pow...
متن کاملFlywheel Energy Storage System Based on Boost DC-AC Converter
To extend the operating speed range of a conventional configuration of FESS (flywheel energy storage system), an additional DC-DC boost converter is required between the machine and grid side converters to regulate the output voltage. This paper presents a new FESS based on three-phase boost inverter topology. The proposed system facilitates voltage boost capability directly in a single-stage. ...
متن کاملBrushless Doubly-Fed Induction Machine as a Variable Frequency Transformer
VFT (variable frequency transformer) has been recently used as an alternative to HVDC (high voltage direct current) to control power flow between asynchronous networks. VFT consumes less reactive power than a back-to-back HVDC system, provides faster initial transient recovery, and has better natural damping capability. VFT is simply a DFIM (doubly-fed induction machine) where the machine torqu...
متن کاملA Buck-Boost Converter-Based Bipolar Pulse Generator
This paper presents a buck-boost converter-based bipolar pulse generator, which is able to generate bipolar exponential pulses across a resistive load. The concept of the proposed approach depends on operating the involved buck-boost converters in discontinuous current conduction mode with high-voltage gain and enhanced efficiency. A full design of the pulse generator and its passive components...
متن کاملEXPERIMENTAL INVESTIGATION OF DRAG REDUCTION ON AHMED MODEL USING A COMBINATION OF ACTIVE FLOW CONTROL METHODS
Aerodynamic drag is an important factor in vehicles fuel consumption. Pressure drag which is the main component of total drag is a result of boundary layer separation from vehicle surface. Flow control methods are applied to avoid or at least delay separation. Depending upon whether these methods consume energy to control the flow or not, they are called active or passive control methods. In th...
متن کامل