Layer-by-layer epitaxial thin films of the pyrochlore Tb2Ti2O7.
نویسندگان
چکیده
Layer-by-layer epitaxial growth of the pyrochlore magnet Tb2Ti2O7 on the isostructural substrate Y2Ti2O7 results in high-quality single crystal films of up to 60 nm thickness. Substrate-induced strain is shown to act as a strong and controlled perturbation to the exotic magnetism of Tb2Ti2O7, opening up the general prospect of strain-engineering the diverse magnetic and electrical properties of pyrochlore oxides.
منابع مشابه
High-resolution transmission electron microscopy observations of La<sub>2</sub>Zr<sub>2</sub>O<sub>7</sub> thin layers on LaAlO<sub>3</sub> obtained by chemical methods
La2Zr2O7 (LZO) films have been grown by metalorganic decomposition (MOD) to be used as buffer layers for coated conductors. LZO can crystallize into two similar structures: fluorite or pyrochlore. Coated conductor application focuses on pyrochlore structure because it is a good barrier against oxygen diffusion. Classical x-ray diffraction is not able to separate the contribution of these two st...
متن کاملA Study of ZnO Buffer Layer Effect on Physical Properties of ITO Thin Films Deposited on Different Substrates
The improvement of the physical properties of Indium Tin Oxide (ITO) layers is quite advantageous in photovoltaic applications. In this study the ITO film is deposited by RF sputtering onto p-type crystalline silicon (c-Si) with (100) orientation, multicrystalline silicon (mc-Si), and glass substrates coated with ZnO and annealed in vacuum furnace at 400°C. Electrical, optical, structural a...
متن کاملMechanical Properties and Microstructural Evolution of Ta/TaNx Double Layer Thin Films Deposited by Magnetron Sputtering
Crystalline tantalum thin films of about 500nm thickness were deposited on AISI 316L stainless steel substrate using magnetron sputtering. To investigate the nano-mechanical properties of tantalum films, deposition was performed at two temperatures (25°C and 200°C) on TaNx intermediate layer with different N2/Ar flow rate ratio from 0 to 30%. Nano-indentation was performed to obtain the mechani...
متن کاملFabrication Of Cu(In,Ga)Se2 Solar Cells With In2S3 Buffer Layer By Two Stage Process
Cu(In,Ga)Se2 thin films (CIGS) on metallic substrate (titanium, molybdenum, aluminum, stainless steel) were prepared by a two-step selenization of Co-evaporated metallic precursors in Se-containing environment under N2 gas flow. Structural properties of prepared thin film were studied. To characterize the optical quality and intrinsic defect nature low-temperature photoluminescence, were perfor...
متن کاملEnhanced Physical Properties Of Indium Tin Oxide Films Grown on Zinc Oxide-Coated Substrates
Structural, electrical and optical properties of indium tin oxide or ITO (In2O3:SnO2) thin films on different substrates are investigated. A 100-nm-thick pre-deposited zinc oxide (ZnO) buffer layer is utilized to simultaneously improve the electrical and optical properties of ITO films. High purity ZnO and ITO layers are deposited with a radio frequency sputtering in argon ambient with plasma p...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Nanotechnology
دوره 28 5 شماره
صفحات -
تاریخ انتشار 2017