Adaptive control of full penetration gas tungsten arc welding
نویسندگان
چکیده
AbstructThis application paper addresses the control of a nonminimum-phase plant with variable large orders and delays. The process concerned is full penetration gas tungsten arc welding. Based on an analysis of accepted adaptive algorithms, the generalized predictive control algorithm presented by Clarke et al. is selected as the principal control strategy. An adaptive generalized predictive decoupling control scheme is constructed. To decouple our nonminimum-phase multivariable plant, a predictive decoupling algorithm is also proposed. Simulations are performed to determine the default parameters of the algorithms. The performance has been tested by both simulations and experiments.
منابع مشابه
Adaptive voltage control of gas tungsten arc welding
An adaptive control based on fuzzy logic has been implemented for Gas Tungsten Arc Welding (GTAW). This adaptive controller eliminates the problems frequently experienced with traditional Automatic Voltage Control (AVC) systems, which do not adequately perform for all operational conditions because of the non-linear relationship between the arc voltage, current and arc length. This paper examin...
متن کاملStructure-property Interaction in Flux Assisted Tungsten Inert Gas Welding of Austenitic Stainless Steel
Austenitic stainless steel SS304 grade was welded with active Tungsten Inert Gas (TIG) welding process by applying a flux paste made of SiO2 powder and acetone. SiO2 flux application improves the weld bead depth with a simultaneous reduction in weld bead width. The improvement in penetration results from arc constriction and reversal of Marangoni convection. Experimental studies revealed that t...
متن کاملWeld Pool Oscillation as a Tool for Penetration Sensing during Pulsed GTA Welding
This paper deals with weld pool oscillation during pulsed gas tungsten arc (GTA) welding of unalloyed steel. Experiments were carried out in which the weld pool was triggered into oscillation during both the base time and the pulse time by short current peaks, superimposed on the pulsed welding current. The arc voltage was continuously measured during welding and the oscillation frequency spect...
متن کاملTig Welding Process Pdf
Tungsten inert gas (TIG) welding, also called as gas tungsten welding 1. (a) Schematic of TIG welding Process (b) Variety of tungsten electrodes. The activated TIG (ATIG) welding process mainly focuses on increasing the depth of penetration and the reduction in the width of weld bead has not been paid. Tungsten inert gas welding, TIG is widely applied in manufacturing process for different The ...
متن کاملVision-based neuro-fuzzy control of weld penetration in gas tungsten arc welding of thin sheets
This paper develops a vision-based neuro-fuzzy system to control the weld joint penetration in Gas Tungsten Arc Welding (GTAW) of thin sheets. To this end, a camera equipped with a specially designed composite light-filter is used to observe the weld pool from the topside of the workpiece so that comparatively distinct images of the weld pool are obtained. As the Backside weld Width (BW) reflec...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- IEEE Trans. Contr. Sys. Techn.
دوره 4 شماره
صفحات -
تاریخ انتشار 1996