Juggling on a high wire: Multitasking effects on performance
نویسندگان
چکیده
In this study, we develop a theoretical model that predicts an inverted-U relationship between multitasking and performance. The model is tested with a controlled experiment using a custom-developed application. Participants were randomly assigned to either a control condition, where they had to perform tasks in sequence, or an experimental condition, where they could discretionarily switch tasks by clicking on tabs. Our results show an inverted-U pattern for performance efficiency (productivity) and a decreasing line for performance effectiveness (accuracy). The results of this study indicate that the nature of the relation between multitasking and performance depends upon the metric used. If performance is measured with productivity, different multitasking levels are associated with an inverted-U curve where medium multitaskers perform significantly better than both high and low multitaskers. However, if performance is measured with accuracy of results, the relation is a downward slopping line, in which increased levels of multitasking lead to a significant loss in accuracy. Metaphorically speaking, juggling multiple tasks is much more difficult while balancing on a high wire, where performance mishaps can have serious consequences. & 2011 Elsevier Ltd. All rights reserved.
منابع مشابه
Corrosion Inhibition of Sodium Phosphate for Coarse and Near Ultrafined-Grain Mild steel surface
An ultrafine grain surface layer with average crystallite size of 28 nm was produced on annealed mild steel through a wire brushing process. The effects of grain size reduction on the inhibition performance of sodium phosphate were investigated using polarization and electrochemical impedance spectroscopy (EIS) measurements. The crystal grain size of wire brushed surface was analyzed by X-ray d...
متن کاملExperimental Investigation of Surface Roughness and Kerf Width During Machining of Blanking Die Material on Wire Electric Discharge Machine
Wire electric discharge machine (WEDM) is spark erosion in unconventional machining technique to cut hard and the conductive material with a wire as an electrode. The blanking die material SKD 11 is a high carbon and high chromium tool steel with high hardness and high wearing resistance property. This tool steel has broad application in press tools and dies making industries. In this research ...
متن کاملDeveloping Very Fine Nanopearlitic Structure in a High Carbon Steel Wire before Drawing
The effects of steel wire patenting process parameters on very fine interlamellar spacing in the pearlitic steel wire were investigated and the optimized condition of the process was achieved. In this work, the initial nanopearlitic structure was obtained in a 0.72 wt% carbon steel wire before the wire drawing process. The results were the minimum interlamellar spacing of 35 nm and maximum ulti...
متن کاملCoupling Effects and Performance of Loran Transmitter Antennas
It is known that if a conductor resides in the neighboring of an antenna with a small distance relative to the wavelength, it induces a reverse current on the conductor. This paper involves the unavoidable coupling effects on some common types of LF antennas, due to the large wavelength in this frequency band. In particular, after some discussions about top-loaded antennas, the coupling effect ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Int. J. Hum.-Comput. Stud.
دوره 70 شماره
صفحات -
تاریخ انتشار 2012